Visonic CLIP MCW Ultra Small Wireless Curtain PIR Detector

Be the first to review this product

Clip MCW is the industry's smallest and most elegant wireless curtain-type PIR detector designed for the protection of doors, windows and all-glass walls. This fully-superv
Brand: Visonic Security Systems
Part Number: CLIP MCW

Availability: This item requires 7 business days to process.




Ultra-small wirefree curtain PIR detector

Clip MCW is the industry's smallest and most elegant wireless curtain-type PIR detector designed for the protection of doors, windows and all-glass walls. This fully-supervised detector featuring anti-collision PowerCode(TM) technology is compatible with the PowerMax(R) wireless family and other Visonic PowerCode(TM) wireless receivers.

Clip MCW creates a protective curtain enabling complete coverage for properties with large or subdivided windows, doors and all-glass walls. Clip MCW provides full perimeter protection while allowing consumers to normally and freely use the premises without triggering a false alarm.

Clip MCW uses advanced patented digital FM signal processing, as well as the well-known patented TMR(TM) algorithm to enable three different detection modes (2m, 4m, 6m) in a single detector, each programmable for optimal performance with the unit's specific application. Advanced motion analysis enables Clip MCW to distinguish human motion from other disturbances for the most accurate detection and the fewest false alarms.

The Clip MCW is available in several optional frequencies in compliance with European, U.S. and other international standards.

Clip MCW Features

  • A fully-supervised wireless curtain-type detector with anti-collision PowerCode(TM) technology
  • Compatibility with members of the PowerMax(R) family and all Visonic PowerCode(TM) wireless panels and receivers
  • Fast and easy installation
  • Digital FM technology incorporating an advanced selector (2m, 4m and 6m) for optimized detection and false alarm processing
  • Ultimate false alarm elimination via patented TMR(TM)algorithm
  • 3-volt long-life high power standard lithium battery
  • Attractive, sleek design suitable for any home or office
  • Several optional frequencies available in compliance with international standards

Additional Info

Additional Info

Part Number CLIP MCW
What's in the box (1) Visonic CLIP MCW Ultra Small Wireless Curtain PIR Detector
Variant N/A


Write Your Own Review

You're reviewing: Visonic CLIP MCW Ultra Small Wireless Curtain PIR Detector

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars


Detector Type Dual-element low noise pyroelectric sensor
Number of Curtain Beams 2
Mounting Positions See Figures 2 through 6
Range Settings Long (6 m), Medium (4 m) and Short (1.2 - 2m) (Jumper-selected)
Internal Battery 3V Lithium battery, type CR123A. For UL installations, use Panasonic or Sanyo only
Nominal Battery Capacity 1450 mA/h
Battery Life (with LED on) 3 years (for typical use)
Battery Power Test Performed immediately upon battery insertion and periodically every several hours
Microprocessor 8-bit, low power CMOS
Visual Indications LED Lights for about 3 seconds upon transmission of alarm & tamper messages and upon motion detection in the walk test mode.
LED Flashes during the power-up stabilization period (approx. 2 min), or after restoring the cover (by pressing the tamper switch).
LED Does not light upon transmission of supervision messages
Alarm Period Approx. 3 seconds
Rearm Timer Rearms the detector 2 minutes after the last alarm
Frequency (MHz) 315 (U.S. version), 433.92, 868.95, 869.2625 or other frequency according to local requirements
Transmission Sequence 3 data bursts at variable intervals within 3 seconds
Encoding 24-bit ID, over 16 million possible combinations
Total Message Length 36 bits
Tamper Alert Reported when a tamper event occurs and in any subsequent message, until the tamper switch is restored
Supervision Message Signaling at 60-minute intervals (U.S. version), 15 minute intervals (UK version), or according to the local standards
Height 1.8 - 2.4 m (6 - 8 ft)
Installation Options See Figures 9 through 13
Operating Temperature -10°C to 50°C (14°F to 122°F)
Storage Temperature -20°C to 60°C (-4°F to 140°F)
RFI Protection > 20 V/m to 1000 MHz
Compliance with Standards Directive 1999/5/EC of the European Parliament. EN 50131-2, Grade 2, Class II 2 DE3594
Dimensions (H x W x D) 105 x 35 x 30 mm (4-1/8 x 1-3/8 x 1-3/16 in.)
Weight (with battery) 60 g (2.1 oz)
Color White
U.S. Patent 5,693,943 (other patents pending)