iWise Quad Dual-Sensor Quad PIR

Be the first to review this product

iWISE QUAD uses two separate dual-element sensors to reduce false alarms and improve catch performance in hostile environments.Features:
Brand: Rokonet
Part Number: RK800Q00000B

Availability: This product has been discontinued.




The iWISE QUAD has two independent dual-element PIR sensors and processing channels, to reduce false alarms and improve catch performance in hostile environments.

iWISE QUAD is an improved version of Rokonet's best selling COSMoS PQ-Quad, with an improved lens design and Intelligent Digital Signal Processing (DSP). Move to the iWISE series of cutting edge professional detectors, the wisest choice for your peace of mind and your bottom line!

iWISE Intelligent Digital Signal Processing

iWISE QUAD is an improved version of Rokonet's best-selling COSMoS PQ-Quad, with better detection AND better false alarm immunity.

iWISE QUAD has an improved lens design and Intelligent Digital Signal Processing methods that automatically adjust the alarm threshold and pulse count verification according to the actual event occurring.

The challenge facing all detector manufacturers is where to set the threshold for alarm. Too high - and the detector is not responsive enough. Too low - and the detector will false alarm. The solution is to take into account as many factors as possible and to adjust the threshold level in real-time according to the event taking place.

iWISE Digital Signal Processing algorithms take into account environmental and intruder behavior factors in order to make an intelligent alarm decision. Among these are True Temperature Compensation, Frequency Compensation and Automatic pulse count adjustment.


  • Two dual element pyroelectric sensors
  • Two independent processing channels
  • 3 LED walk test indication
  • Superior false alarm rejection of white light and hot air turbulance
  • Digital signal processing - dual element pyroelectric sensors
  • Flexible installation height up to 3.3m (10ft 10in)
  • Pigmented lens for white light protection
  • Patented true temperature compensation
  • High RF immunity 30V/m
  • Protective sleeve
  • Creep zone
  • Alternate polarity pulse count
  • Wall/corner or ceiling swivel (optional)
  • Wall tamper-proof swivel (optional)

Additional Info

Additional Info

Part Number RK800Q00000B
What's in the box (1) iWise Quad Dual-Sensor Quad PIR
Variant N/A


Write Your Own Review

You're reviewing: iWise Quad Dual-Sensor Quad PIR


Coverage 15m (50') 100º, 4 vertical levels plus creep zone
Variable Mounting Height 2.1m to 3.3m (6'11" to 10'10")
Intruder Detection Method Two Dual Element PIR sensors and Intelligent Digital Signal Processing
Alarm Threshold Automatically adjusted for walking speed, frequency and room temperature
Pulse Count Automatic adjusted according to signal level and intruder behavior
Installer Selectable Sensitivity Settings 2 jumper selectable sensitivity levels
RFI Immunity 30 V/m from 10MHz to 1GHz
Operating Voltage 9-16 VDC
Current Consumption 15 mA at 12VDC
43 mA at 16 VDC (Maximum with all LEDs on)
Alarm and Tamper Contacts NC, 100mA, 24 VDC
Alarm Time 2.2 seconds minimum
Warm-up Time 2 minutes
Optical Filtering for White Light Protection Pigmented Fresnel lens
Operating Temperature -20º C to 55º C (-4º F to 131º F)
Storage Temperature -20º C to 60º C (-4º F to 140º F)
Dimensions 128 x 64 x 41 mm (5 x 2.5 x 1.6")