Honeywell Vista21IP Starter Security Kit

Be the first to review this product

Honeywell Vista21-IP Starter Security Kit is an easy way to start a new security project. It comes with all the equipment you could need to start your home security project including a motion sensor and siren. Add a wireless receiver  to expand the capabilities of the system for wireless devices!

Brand: Honeywell Intrusion
Part Number: V21IP60STARTERKIT

Availability: In stock




The VISTA-21iP provides up to 48 zones of protection, an on-board IP connection, graphic keypad support and dual partitions. The VISTA-21iP gives your system the ability to send alarm signals to your monitoring company via an Internet Protocol (IP), improving the speed at which information can be delivered to and from the control panel. When used with an optional AlarmNet® GSM that snaps right on the board, the VISTA-21iP can be installed in premises without TELCO lines – guaranteeing communication independent of any infrastructure. The panel’s installation advantages, innovative end-user benefits and robust system capacity make the VISTA-21iP an ideal choice for higher-end installations.


  • Internet alarm reporting and uploading/downloading capability via on-board AlarmNet Internet Communicator
  • Supports four graphic touchscreen keypads
  • Wireless keys can be programmed without using zones
  • Eight on-board hardwired zones standard (15 when Zone Doubling feature is used)
    – 40 hardwired expansion zones
    – 40 wireless expansion zones
  • Two low current on-board trigger outputs
  • 100 Event Log viewable at system keypads with time/date stamp
  • 48 system user codes assignable to either partition
  • Expandable to 48 total zones when used with hardwired and/or wireless expansion modules
  • Two independent partitions plus a common partition
    – Global arming from any system keypad
    – Goto function to view or operate one partition from the other
    – Separate partition account numbers
  • 16 output devices
    – Relays (Model 4204 Relay Modules, or 4229 Expansion Module)
  • Four installer-configurable zone types allows the installer to create custom zone types by assigning all zone attributes
  • Supports four-wire, and up to 16 two-wire smokes
    – Works with Sentrol CleanMe™ maintenance signal
  • Multiple actions on output devices depending on system state
    – Turns lights off when system arms
    – Turns the same light on when system disarms
    – Flashes same lights when system is in alarm
  • Built-in phone line cut monitor with programmable delay and annunciation options
    – Display on system keypads
    – Trigger local sounders
    – Trigger system bell

Security Dealer Features

  • Automatic System Load Shed
    – During extended AC power fail, the system battery will be disconnected to prevent irreversible battery failure. Reduces service calls to replace batteries.
  • Dynamic Signaling
    – Reduces redundant reporting to the central station when multiple reporting methods are used; i.e. digital dialer and AlarmNet radio

Valuable End-User Features

  • Viewable on system keypads:
    – Exit countdown
    – Time and date display*
    – Event log*
  • Auto keypad backlighting on entry
  • Keyswitch arming
  • Programmable macro buttons and single-button arming
  • Supports a variety of wireless remote controls for single-button operation
  • User Scheduling
    – Auto arm/disarm
    – “User access” time windows
  • VIP Module allows system control from any touchtone phone
  • Chime by zone

*Requires custom alpha keypad

Additional Info

Additional Info

What's in the box

(1) Vista 21IP Control Panel
(1) 6160 Alpha Keypad
(1) IS3035 anti-masking Motion Sensor
(1) WAVE-2 Indoor Siren
(1) BD124 12 Volt 4AH Battery
(1) 16.5 Volt Transformer
(1) Cam Lock

Variant N/A


Write Your Own Review

You're reviewing: Honeywell Vista21IP Starter Security Kit

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars





sale $38.50





• Aux. power 12VDC, 600mA maximum
• Seven hour standby at 400mA aux. load with four amp hour battery
• 16.5VAC/40VA transformer
• Alarm output 12VDC, 2.0 amps max. – For agency listed installations, combined aux. and alarm output cannot exceed 700mA

Output Control
• Supports up to four relay boards (up to 16 relays)

• Eight hardwired zones (15 with zone doubling)
• Selectable response 10msec, 350msec, 750msec
• Assignable to any partition
• 20 selectable zone types plus four configurable zone types
• Programmable swinger suppression

IS3035 Motion Detector

Range: 40’ x 56’ / 12 m x 17 m
Wall Mounting Height: 6’9” – 8’9” (2.1 m - 2.7 m); Optimal 7’6” (2.3 m)
Power: 9.0-15 VDC (UL: 9.5-15 VDC); 11 mA typical, 13 mA maximum;
AC Ripple: 3 V peak-to-peak at nominal 12 VDC
Alarm Relay: Energized Form A; 30 mA, 25 VDC, 22 Ohms resistance maximum.
Alarm Relay Duration: 3 seconds
Tampers: Cover & Wall; (NC with cover installed) Form A; 30 mA, 25 VDC
RFI Immunity: 20V/m 10-1000MHz, 15V/m 1000-2700MHz
PIR White Light Immunity: 6,500 Lux typical
Fluorescent light filter: 50 Hz / 60 Hz.
Operating Temperature: 14° to 131° F / -10° to 55° C
Relative Humidity: 5 to 93% (UL tested at 93%); non-condensing
Temperature Compensation: Advanced Dual Slope
Dimensions: 3.86” H x 2.24” W x 1.71” D / 9.8 cm H x 5.7 cm W x 4.35 cm D
Weight: 3 oz / 85 g (net weight)

6160 Custom Alpha Keypad

Physical: 5-5/16"H x 7-3/8"W x 1-3/16"D
Displays: 2 x 16 alpha-numeric supertwist LCD, backlit.
Sounder: Speaker.
Voltage: 12VDC
Current: 150mA (ARMED LED lit, LCD backlight and sounder on), reduces to 40mA when panel is operating in standby,backlight off).