Voice Alert System-6 offers:

• 6-Zone Monitoring Capability
• Customized Voice-Recordable Alerts
• All Weather, Wireless PIR Sensor Transmitters
• Multiple Beam Patterns for Optimal Detection
• Adjustable Mounting, Beam Sensitivity, and Delay Timer
• 4 "C" Relays to Trigger Additional Devices

When a zone is breached, a signal is sent up to 1000 ft (300 ft through walls) to the remote Base Unit which plays one of six user voice-recorded messages identifying the zone.

Common applications include: Wireless Driveway Alarm, Perimeter Security, Customer and Visitor Notification, Customer Greeting, Child Safety, Pool Security, Delivery and Supply Room Monitoring, and Annunciation of activity at CCTV Camera.

To install, simply mount the PIR where you need zone control, plug in the base unit and then record a voice message to identify each zone. Other features include: on/off switch, audio line output connection, adjustable volume control, missed message indicator, missed message playback, one button message check, enable/disable PIR switch, and low battery voice notification. Voice Alert System-6 is an excellent plug and play solution for hard-to-wire areas.

Voice Alert System-6 General Specifications:

• Records six separate voice messages (6 seconds each)
• Supports an unlimited number of Sensor Transmitters
• Speaker volume control
• Voice message (user initiated): One button for each zone
• Voice message (transmitter initiated): Programmed to desired message (user programmable)
• Individual “C” relays enable other devices to be triggered
• Missed message indicator: Flashing LED
• Missed message playback: Push button
• Receiver type: Super Heterodyne
• Frequency of receiver: 433.92 MHz
• Method of recording: Digital, solid state, user-recordable
• FCC Part 15 Approved
• Receiver Stability: Crystal
• Receiver Sensitivity: 100dBm
• Low Battery LED indicates sensor w/low battery
• Low Battery voice message identifies specific zone
• AC/DC Power Adapter - approximately 7' cord length
• Power Requirement: 117V AC - 60Hz
• Power Input: 9VDC - 1 AMP
• Installation: Wall or tabletop
• Receiver/Speaker Dimensions: 8.50” W x 1.75” H x 5.75” D

Wireless PIR Sensor Transmitter General Specifications:

• Monitored range: 40' x 40' feet
• Adjustable (rotating, pivoting) sensor mounting
• Indoor/outdoor all-weather construction
• Adjustable detection sensitivity
• Adjustable delay timer (0-3 minutes)
• Battery operated - 9V battery included
• Method of intrusion detection: Pyroelectric Infrared Detector (Heat)
• Adjustable Beams: Default: Fan Beam approximately 40' x 40' (mounted 7.5')
• Frequency of RF transmitter: 433.92 MHz
• Output Power: FCC Part 15 Approved
• Transmission distance: up to 300 feet through walls
• Code programming: User programmable 288 codes
• Power management: Battery saver settings
• Sensor Transmitter Dimensions: 2.38” W x 5.00” H x 5.00” D

Warning
Voice Alert is not intended to be a LIFE SAVING instrument as it may false trigger or miss a trigger. Atmospheric conditions, sun spot activities, local transmitters, or receiver nulls may prevent triggering or cause false triggering. It is the users responsibility to take this into consideration.