The DISC-ET is a ceiling mounted energy management PIR sensor for lighting control. Its main purpose is to save energy by switching lights on upon detection of movement within its coverage area. When movement in the area ceases, the lights remain on for a predetermined duration, and are then switched off automatically.
The detector is equipped with an adjustable operation timer, which causes the output relay to drop out at the end of a selected duration (provided that no further movement is detected by the PIR sensor).
|What's in the box||(1) Visonic Energy Management Ceiling Mount PIR Detector|
Write Your Own Review
|Detection Pattern||A virtually conical pattern of 36 ft diameter, if installed at the height of 12 ft|
|Input Voltage||9 – 16 VDC or 12 VAC|
|Current Drain||6 mA max. (standby), 45 mA max. (relay energized) @ 12VDC|
|Relay Output||Form C contacts (normally open, normally closed), rated 1A resistive/30 VDC|
|Relay Operation Timer||Adjustable, 3 seconds to 18-20 minutes|
|LED||Walk Test – (switchable)|
|Detector||Dual-element low-noise pyroelectric sensor|
|Ceiling Mounting||12 ft (maximum height)|
|Operating Temp||14°F to 122°F|
|Storage Temp||-4°F to 140°F|
|RFI Protection||Greater than 10V/m to 1000MHz|
|Dimensions||3.4 x 0.95 in|