Low Prices and Same Day Shipping

Expert Advice You Can Trust!

888-501-7870

SkylinkHome Motion Activated Light Kit9

See other Skylink products

Be the first to review this product

The SK9 is designed so as not to work during bright daylight hours. The movement sensibility of the motion detector is adjustable and can be placed as much as 500 feet away from the receiver, so even larger spaces can utilize the unit effectively.
Brand: Skylink
Part Number: SK9

Availability: More than 5 in stock

Ships tomorrow if ordered within
23 hrs and 35 mins!

$38.00
Skylink

We Offer Lowest Prices
Guaranteed

Same Day Shipping on orders
placed before 2 pm PST

Highest Quality Products
Guaranteed

30 Day Money Back Guarantee

Description

Details

You can use the SK9 SkylinkHome Motion Activated Light with a SkylinkHome receiver to make sure the light in any room will turn ON/OFF instantly the second u walk by.

The SK9 is designed so as not to work during bright daylight hours.  The movement sensibility of the motion detector is adjustable and can be placed as much as 500 feet away from the receiver, so even larger spaces can utilize the unit effectively.

The SK9 can be a great money saver.  Forgetting to turn your lights off before leaving your house can be a common occurrence, but the SK9 will ensure that never happens again.

NOTE: The SK9 is a stand-alone motion detector and dimmer light bulb that requires a SkylinkHome receiver to function.

Features

  • Save energy by turning ON/OFF lights automatically.
  • Turn on the lights by movement when dark.
  • Movement will not turn on the lights when bright.
  • Movement sensibility adjustable.
  • Selectable timer from 5 to 60 minutes.
  • Works with Incandescent and CFL bulbs, up to 60W load.
  • Wireless remote control range is up to 500 feet in open area.
  • No installation required, just screw in a lamp socket.

Frequently Asked Questions:

Q. Can I use SkylinkHome dimmer to dim Compact Fluorescent Lamp (CFL)?
A. Yes, you can. Any of SkylinkHome dimmers is designed to be compatible with dimmable CFLs. The CFL itself must be dimmable, non-dimmable CFL can not be used with any dimmer. Some dimmable CFLs are not up to standards, for example, limited dimming range, flashing when dimmed low, etc., please select the good quality bulbs to use with dimmer.
 
Q. Is there any minimum load requirement for your dimmer?
A. A minimum load of 7W is required for the proper function of wall mount two-wire dimmer. Other dimmers have no minimum load requirement.
 
Q. Does one button on a remote only control one light?
A. No, it can control any number of lights assigned to it.
 
Q. Can I control the lights in a room all at once?
A. Sure, you can assign all the lights to one zone on a remote and control them all at once.
 
Q. How can I control the individual light separately?
A. Buy each light a dimmer or a switch. Use one button for one light on your remote.
 
Q. How can I add a 3-way switch?
A. Just attach a wall remote on the wall and assign it to a switch or dimmer, it becomes a 3-way switch or dimmer. No wiring is needed.
 
Q. Do I have to rewire to install a wall switch?
A. No. The Skylink wall switch or dimmer has two-wire design for retrofitting. Simply replace your old switch with the new one and the installation is done.
 
Q. I do not want to do any installation. Can I still dim a light?
A. Yes. You can use SkylinkHome Plug-in or Screw-in dimmer, which requires no installation.
 
Q. Does dimming help to save energy consumption?
A. Absolutely, for example, if you dim your light to 50% level with a SkylinkHome dimmer, you save about 40% of electricity.
 
Q. I have a large house. Can SkylinkHome remote signal reach every corner of my home?
A. In open area, it can reach as far as 300 feet. Normally the remote signal can reach every corner in your home. If dead zone happens, add a SkylinkHome repeater somewhere can eliminate the issue.

PLEASE NOTE:  SkyLinkHome products are not compatible with existing Skylink Brand security systems. The PR-318S, however, can function as a converter for certain SkylinkHome transmitters to operate the SC-100, SC-1000 and AM-100 Skylink Brand systems.

Additional Info

Additional Info

Part Number SK9
What's in the box (1) LX-318 Mini Screw-In Dimmer
(1) ID-318 Motion Sensor

Reviews

Write Your Own Review

You're reviewing: SkylinkHome Motion Activated Light Kit9

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Rating

Accessories

Add-on

Specifications

LX-318 Mini Screw-In Dimmer Specifications 120V AC, 60Hz
Input Voltage 120V AC, 60Hz
Standby Current 6mA
Minimum Load 10W
Maximum Load 60W at 120VAC
Operating Frequency 318MHz
Operational Temperature -4°F - 140°F (-20°C - 60°C)
Humidity 5% - 95%
Range Up to 500 feet in open area