Getting up in the middle of the night, or coming home from a late work shift, can make it difficult to properly see the light switches in your home. With the SK10 - SkylinkHome Motion Activated Light Kit10 you can make sure the light in any room will turn ON/OFF instantly the second u walk in.
The SK10 Kit comes with (1) Plug In Dimmer Model, and (1) Motion Sensor. The SK10 is designed so as not to work during bright daylight hours. The movement sensibility of the motion detector is adjustable and can be placed as much as 500 feet away from the Plug In Dimmer, so even larger spaces can utilize the SK10 effectively. Additionally, the timer for the unit can be adjusted as well, with choices ranging from 5 to 60 minutes, depending on your preference.
The SK10 can be a great money saver. Forgetting to turn your lights off before leaving your house can be a common occurrence, but the SK10 will ensure that never happens again. And because the Kit is a truly expandable system, you can integrate a wide selection of SkylinkHome lighting equipment.
- Save energy by turning ON/OFF lights automatically.
- Turn on the lights by movement when dark.
- Movement will not turn on the lights when bright.
- Movement sensibility adjustable.
- Selectable timer from 5 to 60 minutes.
- Works with Incandescent and CFL bulbs, up to 300W load.
- Wireless remote control range is up to 500 feet in open area.
- Easy to install.
Motion Detector Features:
- Saves energy by turning On/Off lights automatically
- Selectable timer from 5 to 60 minutes
- Turns on the lights by movement when dark
- Movement will not turn on lights when bright
- Movement Sensibility adjustable
- Controls wireless receivers up to 500 feet away in open area
Frequently Asked Questions:
|Q.||Can I use SkylinkHome dimmer to dim Compact Fluorescent Lamp (CFL)?|
|A.||Yes, you can. Any of SkylinkHome dimmers is designed to be compatible with dimmable CFLs. The CFL itself must be dimmable, non-dimmable CFL can not be used with any dimmer. Some dimmable CFLs are not up to standards, for example, limited dimming range, flashing when dimmed low, etc., please select the good quality bulbs to use with dimmer.|
|Q.||Is there any minimum load requirement for your dimmer?|
|A.||A minimum load of 7W is required for the proper function of wall mount two-wire dimmer. Other dimmers have no minimum load requirement.|
|Q.||Does one button on a remote only control one light?|
|A.||No, it can control any number of lights assigned to it.|
|Q.||Can I control the lights in a room all at once?|
|A.||Sure, you can assign all the lights to one zone on a remote and control them all at once.|
|Q.||How can I control the individual light separately?|
|A.||Buy each light a dimmer or a switch. Use one button for one light on your remote.|
|Q.||How can I add a 3-way switch?|
|A.||Just attach a wall remote on the wall and assign it to a switch or dimmer, it becomes a 3-way switch or dimmer. No wiring is needed.|
|Q.||Do I have to rewire to install a wall switch?|
|A.||No. The Skylink wall switch or dimmer has two-wire design for retrofitting. Simply replace your old switch with the new one and the installation is done.|
|Q.||I do not want to do any installation. Can I still dim a light?|
|A.||Yes. You can use SkylinkHome Plug-in or Screw-in dimmer, which requires no installation.|
|Q.||Does dimming help to save energy consumption?|
|A.||Absolutely, for example, if you dim your light to 50% level with a SkylinkHome dimmer, you save about 40% of electricity.|
|Q.||I have a large house. Can SkylinkHome remote signal reach every corner of my home?|
|A.||In open area, it can reach as far as 300 feet. Normally the remote signal can reach every corner in your home. If dead zone happens, add a SkylinkHome repeater somewhere can eliminate the issue.|
PLEASE NOTE: SkyLinkHome products are not compatible with existing Skylink Brand security systems. The PR-318S, however, can function as a converter for certain SkylinkHome transmitters to operate the SC-100, SC-1000 and AM-100 Skylink Brand systems.
|What's in the box||(1) (PL-318) Plug-In Dimmer
(1) (ID-318) Motion Sensor
Write Your Own Review
|Input Voltage||120V AC, 60Hz|
|Maximum Load||300W at 120VAC|
|Operational Temperature||-4°F - 140°F (-20°C - 60°C)|
|Humidity||5% - 95%|
|Range||Up to 500 feet in open area|