The DCRH-2500 is a very reliable and easy to install driveway alarm. The transmitter operates on one 9-volt battery and has 25' of 3/8" diameter exterior hose that will lie across the drive. When a vehicle drives over the hose, a signal will be sent to the DCR-2500 receiver up to 1/2 miles away*.
The transmitter is weatherproof and meant for exterior locations. Up to 4 zones can be monitored with additional transmitters. The transmitters can be programmed so they will each sound a different tone at the receiver.
The DCR-2500 is the receiver for the DCRH-2500 system. The DCR-2500 plugs into a standard wall outlet and can be placed on a table or mounted on the wall. When the receiver gets a signal from the transmitter, one of four different tones (Classical, Westminster Chime, Ding Dong, or Whistle) will sound for a few seconds. There is also a volume control, allowing you to set the sound to the desired level.
The DCR-2500 is equipped with four form “C” relays (one for each zone), and one 12-volt DC output terminal that will activate for several seconds when a signal is received. The receiver can be user-programmed, so the 12-volt DC terminal and relays can be set to activate for 1 second, 10 seconds, 60 seconds or 10 minutes, if this is desired. The tones will still sound for several seconds.
Operating Range: -30deg.F to 120deg.F
*Actual range will vary depending on the local terrain.
Note: Our 2500 Series products are only compatible with other 2500 Series products
|What's in the box||(1) DCR-2500 Dakota Alert Wireless Receiver
(1) 12V Power Supply for DCR-2500 Receiver
(1) DCHT-2500 - Dakota Alert Duty Cycle Rubber Hose Transmitter
Write Your Own Review
|Operating Temperature Range||-30° F to 120° F|
|Wireless Range||1,500 Feet (1/2 Mile) Line of Sight|
|Operating Voltage||12VDC - Power Supply Included|
|12 volt DC output current||400 mA maximum|
|Relay rating||24VDC at 3 Amp|
|Wireless Range||1,500 Feet (1/2 Mile)|