WR-3000 Extra Wireless WR3000 Receiver

The WR-3000 is the receiver for All 3000 Series systems. The WR-3000 plugs into a standard wall outlet and can be placed on a table or mounted on the wall. When the receiver gets a signal from the transmitter, one of four diff erent tones (Classical, Westminster Chime, Ding Dong, or Whistle) will sound for a few seconds. There is also a volume control, allowing you to set the sound to the desired level. The WR-3000 is equipped with four form relays (one for each zone), and one 12-volt DC output terminal that will activate for several seconds when a signal is received. The receiver can be user-programmed, so the 12-volt DC terminal and one relay will activate for 10 minutes, if this is desired. The tones will still sound for several seconds.

Rating: (3.00)   # of Ratings: 1    Sort: New to Old RE-SORT REVIEWS: Helpful to Less Helpful Less Helpful to Helpful New to Old Old to New High to Low Rating Low to High Rating Showing comments 1-1 of 1 1. samuel on 8/31/2009, said: I have a wireless probe alert 3000 transmitter and three wr3000 receivers. The system has been operational a little over 2 years and this is the first failure. The wr3000 quit sounding the audio alarm and quit triggering the strobe light or test. The red "on" light still works. All troubleshooting efforts failed and I ordered another. The system is outstanding in range and sensitivity. An excellent gate alarm for long distance gates and lots of animals that make a motion detector useless. Was this comment helpful? yes no   (1 people found this comment helpful, 0 did not) Showing comments 1-1 of 1