The high capacity, feature-rich VISTA-20P lets you deliver more value to your customers on each and every sale with up to 48 zones of protection, Internet uploading/downloading, graphic keypad support and dual partitions. VISTA-20P gives you the ability to send alarm signals and upload/download via an Internet Protocol (IP), improving the speed at which information can be delivered to and from the control panel. In addition, the VISTA-20P, used with an AlarmNet Internet or digital communicator can be installed in premises without TELCO lines with no sacrifice in functionality. The panel's installation advantages, innovative end-user benefits and robust system capacity make the value-priced VISTA-20P an ideal choice for higher end installations.
Features
- IP alarm reporting and uploading/downloading capability for Internet and Intranet use via 7845i, 7845i-ENT, 7845GSMR or 7845i-GSM
- Supports four graphic touchscreen keypads
- Wireless keys can be programmed without using zones
- Eight on-board hardwired zones standard (15 when Zone Doubling feature is used)
- 40 hardwire expansion zones
- 40 wireless expansion zones
- Two low current on-board trigger outputs
- 100 Event Log viewable at system keypads with time/date stamp
- 48 system user codes assignable to either partition
- Expandable to 48 total zones when used with hardwired and/or wireless expansion modules
- Two independent partitions plus a common partition
- Global Arming from any system keypad
- Goto function to view or operate one partition from the other
- Separate partition account numbers
- 16 output devices
- Relays (Model 4204 Relay Modules, or 4229 Expansion Module), and/or X-10(R) devices (when used with a 4300 Transformer)
- Four installer-configurable zone types allows the installer to create custom zone types by assigning all zone attributes
- Supports four-wire and up to 16 two-wire smokes
- Works with Sentrol CleanMe(TM) maintenance signal
- Multiple actions on output devices depending on system state
- Turns lights off when system arms
- Turns the same light on when system disarms
- Flashes same lights when system is in alarm
- Built-in phone line cut monitor with programmable delay and annunciation options
- Display on system keypads
- Trigger local sounders
- Trigger system bell
Security Dealer Features
- Automatic System Load Shed
- During extended AC power fail, the system battery will be disconnected to prevent irreversible battery failure. Reduces service calls to replace batteries.
- Dynamic Signaling
- Reduces redundant reporting to the central station when multiple reporting methods are used; i.e. digital dialer and AlarmNet radio
Valuable End-User Features
- Viewable on system keypads:
- Exit countdown
- Time and date display*
- Event log*
- Auto keypad backlighting on entry
- Keyswitch arming
- Programmable macro buttons and single-button arming
- Supports a variety of wireless remote controls for single-button operation
- User Scheduling
- Automatically activates X-10 and relays at programmed times
- Latchkey reports to pagers
- Auto arm/disarm
- "User access" time windows
- Supports up to four end-user numeric pagers
- VIP Module allows system control from any touchtone phone
- Chime by zone
* Requires custom alpha keypad
[1] 
