PSH02 - X10 Power Horn 105db Siren

These piercing, plug-in sirens can be added anywhere around the home. They work with any X10 security system such as: Ademco Lynx - ITI Simon - Visonic Power Max. 105 db Note: Requires (1) PL513 & RJ11 Cord

Rating: (2.50)   # of Ratings: 8    Sort: New to Old RE-SORT REVIEWS: Helpful to Less Helpful Less Helpful to Helpful New to Old Old to New High to Low Rating Low to High Rating Showing comments 1-8 of 8 1. Theodore on 1/1/2009, said: Could not get this unit to work with PowerMax+. Don't know whether Pro2000 system is related to PowerMax but that is what the instruction leaflet was referring to. Will purchase the wireless siren (non-X-10) once this unit is properly returned. Was this comment helpful? yes no   (2 people found this comment helpful, 0 did not) 2. David on 12/8/2008, said: I use this siren primarily for its chime feature, but it is also a decent siren. Installation with my Simon 3 was extremely simple. Was this comment helpful? yes no   (1 people found this comment helpful, 0 did not) 3. Edward on 12/6/2008, said: Sound is very low and poor, would not assist in chasing off an intruder Was this comment helpful? yes no   (2 people found this comment helpful, 0 did not) 4. HeadJar on 5/22/2008, said: I bought two of these. They are not very loud. I put one in the dining room and one in the tool room. I expected them to be louder than the PowerMax built in horn, but I was sadly mistaken. Save your money. Was this comment helpful? yes no   (3 people found this comment helpful, 0 did not) 5. Heath on 4/8/2008, said: The siren is not as loud as I would have liked. If you have a large area with multiple entry points, you will likely need several of these. Was this comment helpful? yes no   (4 people found this comment helpful, 0 did not) 6. Robert on 9/3/2007, said: I have installed a couple of these with a Simon 3 system. If you understand what they are designed for you shouldn't be disappointed. These are the only powerhorns designed to chirp for arming/disarming beeps (when programmed) on the Simon 3 system... pretty handy to place at locations through your house where you can't hear the main panel (or when you have turned off the main panel beeps so you can hide it from potential intruders - easily smashed and disabled). When alarming these little guys aren't really loud but they have a particularly annoying and painful sound. I would suggest seeding a few throughout your house to supplement an interior siren (I have read much on not relying on X10 devices for primary sirens... one day they may not work). If you want a really loud siren, get a 120 volt monster and use low voltage relays from the Simon panel to activate it. Was this comment helpful? yes no   (3 people found this comment helpful, 1 did not) 7. Donald on 4/11/2007, said: This unit is very weak, have since ordered the PH 508 unit and it is very loud. I would not recommend the PSH02 but completely recommend the PH508 unit. It makes a excellent addition to the powermax unit and will serve as the inside alarm itself. Note, if you loose electrical power x-10 units quit working. Be sure to keep the control panel alarm on in case of power failure. db Was this comment helpful? yes no   (3 people found this comment helpful, 0 did not) 8. Douglas on 3/17/2007, said: The Power Horn makes a weak squealing noise. Probably 20db shy of the 105db advertised. Was this comment helpful? yes no   (2 people found this comment helpful, 0 did not) Showing comments 1-8 of 8

RJ11 - 14 FEET CONNECTING CABLE Price: $2.95 Qty:    Add