0 items Tech Support

NX-4-FP - GE Interlogix Security NX-4 Fastpack Alarm System Kit

NX-4-FP - GE Interlogix Security NX-4 Fastpack Alarm System Kit
Manufacturer:  GE Interlogix  SKU:  NX-4-FP
Rating: [6]   Write a Review | Read Reviews
In Stock
Usually leaves our warehouse the same business day.

This system is the BEST for the price. It's very EASY to install, program, and use.

Price:  $115.95

Image Viewer  Show Picture 1Show Picture 2Show Picture 3Show Picture 4Show Picture 5
stuff

NetworX (NX) Faspacks are control panels packaged with popular accessories and options to make it more convenient and cost-effective to purchase for the consumer. A NX Fastpack can be used for almost any application for home and business burglary and fire protection by both homeowners and installers. NetworX is designed by CADDX Controls, Inc., which is owned by GE Interlogix Security.

This particular Fastpack, the NX-4-FP - GE Interlogix Security NX-4 Fastpack Alarm System Kit contains the NX-4 Control Panel, 8 zone LED Keypad, Sentrol PI-6000 motion sensor, 15W speaker, RJ cord & block, transformer, and battery. All NX control panels are designed to incorporate other home control systems and can be networked with Startgate, the RCS CS30, and the Elk Magic Module Home Control Kit.

Some features of the NX-4-FP include –

• Hardwire/wireless hybrid
• 4 fully programmed zones
• Zone doubling options
• Expandable to 8 fully programmable hardwire and/or wireless zones
• 8 user codes
• Maximum of 8 keypads with 1 partition
• Siren supervision
• Fire alarm verification
• 1 duress code
• Modular design with slide in PC boards
• 185-event history log that provides the date, time, event, and user number
• Supports SIA and contact ID communication formats

Benefits of a hybrid alarm system -

Hybrid alarm systems incorporate both hardwired and wireless devices. These types of alarms work well if you live in a home with two or more floors. This means you can use hardwired devices for the first floor and wireless for the second floor and up. Another benefit is using hardwired devices inside, but having the capability to use outside motion detectors to help protect your outside shed, garden, or gate.
Rating: (4.83)   # of Ratings: 6   


Sort: New to Old RE-SORT REVIEWS:

Showing comments 1-6 of 6
1. keith on 10/2/2013, said:

System will do much more then most will need and can be hard to set up. But Home Security Store Tech support was A#1. One 5min. call got everything up and running.

Was this comment helpful? yes no   (2 people found this comment helpful, 0 did not)
2. Anonymous User on 6/5/2012, said:

Had the system for almost 3 years. I called tech support and with in minutes of the basic wiring done the system was up and running. Thanks!!!

Was this comment helpful? yes no   (1 people found this comment helpful, 0 did not)
3. Anonymous User on 11/18/2010, said:

I bought this exact package about 2 years ago and just stopped by to report it has worked flawlessly. You do need to take time to study the installation manual, but if installed properly the system performs to perfection. The only complaint I have is that you can't set the entry delay below 30 seconds. No big deal though.

Was this comment helpful? yes no   (9 people found this comment helpful, 0 did not)
4. Anonymous User on 8/2/2010, said:

I amateur installed this GE NX-4-FP ('Fastpack') system myself without any special training excepting for general electronics background and general micro-controller firmware programming background. Overall the GE-NX-4 unit and sensors, is a very sturdy, well designed and functional unit, coming from the previous GE/Cadx/Adecco family line of professionally installed small business and small office, totally un-attended remote units, with remote dial-out capabilites. For the $150 or less class of 'panel box' for a 'wiring closet', and remote LCD control, electronics units, the GE Fast Pack starter's package deal, is a relative bargain for the novice getting GE security consultant installation, and also for the home do-it-yourselfer such as myself, who does not want monthly security service charges! However, for the do-it-yourselfer, it was not that easy, taking me several weeks of my personal part-time 'home electronics, hobbyist effort', a lot of trail and error and Web search consulting for 'do-it-yourselfer application notes', and is personally not recommended for amateur electronics buyers, given a few big 'catches', such as irrevocably wiping out your unit by easily mis-programming the 'master code' (ending up with a totally useless unit, possibly sold on E-Bay (R )!). The GE guys were clearly from my phone calls to GE factory service, expecting customers to buy this exact system from a 3rd party, authorized GE security consultant, who has expert GE factory training, and he will obviously charge big bucks to do your home installation and monthly service fees from then onwards. GE central offered no 'factory help' to home hobbyists over the phone or e-mail, referring me to 'local 3rd party, GE authorized and trained, security consultants'. Home do it your-selfers, face: no basic wiring diagrams and default OPEN/CLOSE window or door logic (NC logic), resistor placement (see previous customer comments), no Local Building Code (LBC) data for home wiring (running power lines and speaker lines through walls and attic space), no factory service bulletins, no optional (wireless door and room Infrared (IR) sensors) (GE Model NX-548E) add-on wiring diagrams and service bulletins, installation notes and trouble-shooting notes for any complex add-on sensors (fire and smoke sensors, and home dial-out capabilities), no basic FastPack mode, firmware programming samples (such as how to avoid very easily, mis-programming your master code to a new faulty value, from which you may never re-gain control of your unit, without a remote dail-in status option!). GE can promote sales to home do-it-yourselfers, by answering some of these issues, available from central GE factory service to home do-it-yourselfers, instead of relying upon 3rd party, local GE security consultants. I am still having problems connecting up the additional GE-NX-548E (wireless door and window sensor), and if anybody has wiring diagrams and application notes, I would greatly appreciate you posting them here. Txs, Bill in CA

Was this comment helpful? yes no   (8 people found this comment helpful, 2 did not)
5. Keith on 10/25/2009, said:

I just Installed This System About Two Weeks Ago And It Works Like A Beauty. A Few Things I Had Problems With At First But With A little Help From A Friend We Got That Taken Care Of. One Of The Problems Was This System Uses supervisor zones So I Had To Rewire The resistor Wires From series In Oder To Get My Door Sensors To Work Because The Ones That I Bought Were NO Magnets Which Was My Mistake. I Needed To Buy NC Magnets Instead. But I Was Able To Rewire The resistors to get it to work. And The Same Thin With The Motion Sensors That Was Backwards As Well. The Motion That Came With The System Is An NC Sensor It Needed To Be An NO. But All The Zones Are Working Just Fine Now. I Even Added a Second Indoor Siren. But Overall This Is A Great System To Buy.

Was this comment helpful? yes no   (6 people found this comment helpful, 4 did not)
6. John on 10/15/2009, said:

Just installed it. Overall installation was easy, but the documentation missed a few things which to a novice, it could be a problem. So here is what I had to figure out: 1. The motion sensor will not work properly unless you wire a 3.3k resistor in series to the NC wire, because this system uses supervisor zones. The resistor comes with the kit and should be installed inside the motion sensor instead of the panel. 2. Since it only came with one sensor, I had three unused zones. You can't just leave the zones open, you have to install a resistor cross the "zone" and "common" to get it to work. Otherwise, your keypad is going to show a fault for these unused zones. 3. They didn't specify how big of a wire to use for the 2 AC wires coming from the transformer. The system uses 16.5VAC 40VA as primary and 12VDC as secondary. I'm not too familiar with 16.5VAC and didn't know what gauge of wire to get, so I got a spool of 16 gauge wires thinking I should be on the safe side. It didn't work!!! I think the current is too low for the 16 gauge wire, so I used the spool of 22 gauge I bought for the rest of the system and it worked. I think I'm going to change it to a 18 or 20 gauge later on, because 22 is just too small. That's about it. Programing was fairly easy even for a first timer. It would be even easier if you upgrade to a keypad with a LCD display. Because the keypad that comes with the kit uses 8 lights to indicate numerical value in binary. If you don't understand what I'm talking about, it might take you some time to get used to. I have computer background so I didn't have a problem with it, but I could imagine other people might.

Was this comment helpful? yes no   (17 people found this comment helpful, 2 did not)
Showing comments 1-6 of 6
Keypads
NX-116E - Caddx 16 Zone LED Keypad
Price: $45.19
Qty:    Add
NX-124E - Caddx 24 Zone LED Keypad
Price: $48.95
Qty:    Add
NX-148E - Caddx LCD Keypad
Price: $94.65
Qty:    Add
NX-108E - Caddx 8 Zone LED Keypad
Price: $42.39
Qty:    Add


Wireless
CE2R-LX2 - Wireless Keyfob
Price: $62.00
Qty:    Add
TX-8010-01-1 - DesignLine Garage Door Sensor
Price: $39.95
Qty:    Add
VX-402R - Optex Outdoor Motion Detector
Price: $156.03
Qty:    Add
60-504-10-319.5 - ITI Wireless Freeze Sensor
Price: $46.00
Qty:    Add
NX-548E - 48 Zone Wireless Receiver
Price: $53.95
Qty:    Add


Accessories
80-922-1 - Repeater For Caddx Panels
Price: $172.00
Qty:    Add
ELK-1RT - ELK Speaker and Stainless Enclosure
Price: $57.93
Qty:    Add
ELK-44 - ELK Universal 30 Watt 8 Ohm Speaker
Price: $20.50
Qty:    Add
NX-586E - Quick Link Connect
Price: $54.85
Qty:    Add
NX-507E - Caddx Relay Module, X-10 Compatible
Price: $60.97
Qty:    Add
NX-540E - Caddx Telephone Interface module
Price: $73.73
Qty:    Add
XR-1640LED - 16.5 40VA Transformer
Price: $12.00
Qty:    Add
BD712 - 12 Volt 7AH Alarm System Battery
Price: $22.00
Qty:    Add
NX-200 - GE Caddx Zone Doubling Resistor Kit
Price: $12.00
Qty:    Add

(1) NX-4 panel
(1) NX-1308E LED keypad
(1) Hardwire Pet-Immune Motion Sensor
(1) Transformer
(1) Backup Battery
(1) Interior Speaker
(1) RJ Block and Cord
Installation & Startup
Downloads: 0
Size: 803326 KB

LED Keypad Installation
Downloads: 0
Size: 436349 KB

LCD Keypad Installation
Downloads: 0
Size: 536302 KB

Control Panel Installation
Downloads: 0
Size: 186999 KB

Spec Sheet
Downloads: 507
Size: 97 KB