MCT302 | Visonic Wireless Door/Window Transmitter

MCT-302 is a fully supervised PowerCode magnetic contact wireless transmitter, that can be used in virtually all applications where an ordinary magnetic contact is normally used, and where hardwiring would be difficult or impossible.

Features

Fully supervised
Auxiliary hardwire input
Anti-collision signal protection
4-channel - switch selectable
Long-life lithium battery
Compatible with all PowerCode receivers

Rating:

(4.67) # of Ratings: 15

Sort: New to Old RE-SORT REVIEWS:

Showing comments 1-15 of 15

1. Ricardo on 6/13/2008, said:

Excellent transmitter. Very easy to install. Works very well with the Visonic Powermax Wireless Security System. I have 4 of these transmitters installed with my home. They work very well. Fully supervised and has a tamper switch built into the unit. This is a great feature. I highly recommend this transmitter.

Was this comment helpful? yes no (1 people found this comment helpful, 0 did not)

2. Ralfhy on 6/9/2008, said:

Easy to install and easy to use...very recommended

Was this comment helpful? yes no (1 people found this comment helpful, 0 did not)

3. William on 6/3/2008, said:

These contacts are simple to easy and associate with the powermax, i have wood windows so screwing in the two parts was no problem, may be a issue if you had metal or solid window frames.

Was this comment helpful? yes no (1 people found this comment helpful, 0 did not)

4. Edison on 5/27/2008, said:

Instulation simple

Was this comment helpful? yes no (1 people found this comment helpful, 3 did not)

5. LESTER on 5/27/2008, said:

These magnetic sensors work great! My previous alarm system used wireless transmitters connected to one or two magnetic door sensors. They were at least four times larger and much harder to conceal. These beauties are small and barely noticeable between the screen and the window. I had to modify my magnets a bit. There was very little room between the screens and the windows, just enough for the base. The magnets had to mount inside the lip of the window instead of the inner surface. Even then, the cases were too thick. I ended up opening the magnet cases and removing the outer shell. I glued the magnets to the bases directly and mounted these to the inner lip of the window. Perfect spacing. I could have probably mounted the magnets directly to the window, but chose not to. Transmitter range on these are very good. With the base set for Low Sensitivity I was still able to get a strong signal with the base located at opposite ends of the house (about 12meters apart w/ two walls and a floor between the two). I'd buy more of them if the PowerMax+ base would support more (28 max). The secondary sensor built into each unit can be connected to an external magnetic switch. If you use a normally closed one you won't need to use the included resistor. If you do use the secondary sensor, it counts as an additional wireless zone.

Was this comment helpful? yes no (2 people found this comment helpful, 0 did not)

6. Christopher on 1/20/2008, said:

It is so easy to set up one of these as well as to get the security system to accept it. Totally worth the money.

Was this comment helpful? yes no (1 people found this comment helpful, 0 did not)

7. John M on 11/23/2007, said:

Not much to say. They work nicely and are easy to set up and install. Do read directions though to make sure all internal settings are as you wish.

Was this comment helpful? yes no (1 people found this comment helpful, 0 did not)

8. Fred on 11/14/2007, said:

very satisfied with all the items I have purchased so far. the Tech staff is great!! Highly recomended!!!

Was this comment helpful? yes no (1 people found this comment helpful, 0 did not)

9. Sheri on 10/12/2007, said:

I bought this system because there were burglaries in my immediate neighborhood and I didn't feel sfe anymore but this sytem has changed that! I use it all the time, it is very easy to use and install. We wanted this system because it was loud enough to notify my neighbors in the event that someone DID try to break in becuse we didn't want to have to pay for monthly monitoring. You can program the system to call you or the police in the event of a break-in and you are not home. That works fine for us and maybe you too.

Was this comment helpful? yes no (2 people found this comment helpful, 0 did not)

10. Antonio on 9/4/2007, said:

Works well!

Was this comment helpful? yes no (1 people found this comment helpful, 0 did not)

11. Craig on 4/28/2007, said:

I simply bought some 3M mounting squares and cut them to size. I then just stuck them on the windows! Very easy.

Was this comment helpful? yes no (1 people found this comment helpful, 0 did not)

12. Scott Frahmann on 4/5/2007, said:

I have about 15-20 of these installed in my house and not a 1 has failed yet after about 3 years. They are excellent. I have not even replaced the batteries in any of these yet.

Was this comment helpful? yes no (1 people found this comment helpful, 0 did not)

13. Robert on 3/20/2007, said:

The wireless transmitters worked flawlessly. Easy to install

Was this comment helpful? yes no (1 people found this comment helpful, 0 did not)

14. Rich on 3/8/2007, said:

These are Nice Door Or Window Transmitters i Have 10 In My House Easy To Install They Work Great!!!!!!!!!!

Was this comment helpful? yes no (1 people found this comment helpful, 0 did not)

15. Benjamin on 8/11/2006, said:

Unit is easy to install and exceptionally easy to program. Pay close attention to the instructions provided if you choose not to use the AUX input function as this will save you headaches down the line.

Was this comment helpful? yes no (1 people found this comment helpful, 0 did not)

Showing comments 1-15 of 15

Transmitter ID Code	24-bit digital word - 16 million combinations
Overall Message Length	36 bits
Alarm inputs	Built-in magnetic reed, plus 1 auxiliary input
Input circuit	NC/EOL selectable
Message Repetition	Every 3 minutes, or one shot - selectable
Supervision	Automatic status report at 1-hour intervals
Tamper Response	Report every 3 minutes until the tamper switch is restored.
Power Source	3 V lithium battery
Nominal Battery Capacity	1.2 Ah
Battery Supervision	Battery condition data transmitted as part of hourly status report
Compliance with standards	Meets FCC Part 15, ETS 300-220 and MPT1349
Operating Temperature	0°C to 49°C (32°F to 120°F)

Accessories

CR-2 3V - 3 Volt Lithium Battery

Price: $5.50

Qty: Add


K9-85MCW - Visonic Wireless Pet-Tolerant Digital PIR Detector In Stock: Usually leaves our warehouse same business day	POWERMAX+KIT2 - Visonic Powermax Plus Security System Kit In Stock: Usually leaves our warehouse same business day	Powermax+ - Visonic Powermax Wireless Home Security System In Stock: Usually leaves our warehouse same business day	MKP-150 - Visonic Wireless Keypad In Stock: Usually leaves our warehouse same business day

MCT302 - Visonic Wireless Door/Window Transmitter

My Account

Company Policies

Tools & Resources

Company Information