K980MCW - Visonic Wireless 80lbs pet immune infrared

K980MCW - Visonic Wireless 80lbs pet immune infrared

Manufacturer: Visonic  SKU: K980MCW
Rating: [4]   Write a Review | Read Reviews
In Stock: Usually leaves our warehouse same business day   
Price:  $79.95   
Sale!  $75.00

Photos & Video  Show Picture 1

stuff

The K-980 MCW is a fully supervised wireless PIR pet immune detector for residential and commercial applications. It operates with TSI (Target Specific Imaging) patented technology and is immune to pets weighing up to 36 kg (80 lbs). The K-980 MCW has a detection coverage range of 12 x 12 m (40 x 40 ft). It has programmable triple pulse count protection. The K-980 MCW is compatible with all Visonic Ltd PowerCode receivers.

Applications

  • Residential
  • Commercial

Features

  • Immune to animals weighing up to 36 kg (80 lb)
  • Wireless PIR for residential and commercial applications
  • Operates with TSI patented technology
  • 12 x 12 m (40 x 40 ft) coverage
  • Fully supervised
  • Programmable pulse count protection
  • Compatible with PowerMax and all Visonic Ltd PowerCode receivers
Rating: (4.25)   # of Ratings: 4   


Sort: New to Old RE-SORT REVIEWS:

Showing comments 1-4 of 4
1. Ted on 1/1/2009, said:

Tried setting up this device following instructions. Walk-thru test seemed fine; led lit up as expected but when setup and tested with PowerMax+ system armed, could not get unit to trigger alarm; tried at 8 feet; then 7 feet, then 6 feet. Tried within 6 inches - nothing. Cycled thru the process on all pulse settings. Returning unit for replacement.

Was this comment helpful? yes no   (1 people found this comment helpful, 0 did not)
2. TIMOTHY on 11/9/2007, said:

very easy to program and set

Was this comment helpful? yes no   (1 people found this comment helpful, 0 did not)
3. Karl on 1/6/2007, said:

I have had two installed in my home for 3 years. Never did I get a false reading.

Was this comment helpful? yes no   (1 people found this comment helpful, 0 did not)
4. Fred on 1/5/2007, said:

I have a dog and a dog-door that has always bothered me as a possible entry for criminals. I added this sensor over the doggie door and tested it for a week before allowing it to trigger the alarm and it worked flawlessly. I even tried crawling in my own house to test it and it only went off when I stood up after entering but it does not go off when my 50 pound dog is anywhere in the house. (I have 4 in my home.) This is my solution and it has been working perfectly.

Was this comment helpful? yes no   (3 people found this comment helpful, 0 did not)
Showing comments 1-4 of 4
OPTICAL  
Max. Coverage Range 12 x 12 m (40 x 40 ft) / 90°. For Belgium 10x10m / 90°
Pet Immunity Animals up to 36 kg (80 lb) - not verified by UL.
Vertical Adjustment 3-position adjustment scale: 1.8 m (6 ft), 2.1 m (7 ft) and 2.4 m (8 ft).
ELECTRICAL  
Internal Battery 3V Lithium battery, type CR-2. For UL installations, use Panasonic or Sanyo only.
Nominal Battery Capacity 750 mAh
Standby Current Drain 0.015 mA
Transmit Current Drain 20mA (including LED)
Battery Life Expectancy (with LED jumper in ON position) Typically over 3 years (regular version); 2 years (DD243 version).
Battery Supervision Automatic reporting of battery status with each alarm and with periodic supervision message.
FUNCTIONAL  
True Motion Event Verification 2 position selector - 1 (OFF) or 2 (ON) motion events.
Alarm Period 3 seconds
Visual Indications LED lights for about 3 seconds upon transmission of alarm & tamper messages and upon each motion detection in the walk test mode.
LED flashes during the power-up stabilization period, or after restoring (pressing) the tamper switch.
LED does not light upon transmission of supervision messages. Rearm Timer (regular version only): Rearms the detector 2 minutes after the last alarm. Timer disabled in the walk test mode.
WIRELESS  
Frequency (MHz) 315 (U.S. version), 433.92, 868.95, 869.2625 or other frequencies according to local requirements.
Transmission Sequence 3 data bursts at variable intervals within 3 seconds.
Encoding 24-bit ID, over 16 million possible combinations.
Total Message Length 36 bits.
Tamper Alert Reported when a tamper event occurs and in any subsequent message, until the tamper switch is restored.
Supervision Message Signaling at 60 minutes interval (U.S. version), 15 minute interval (UK version) or according to local standards.
MOUNTING  
Height Up to 2.4 m (8 ft)
Installation Options Surface or corner (without bracket); surface or ceiling (with bracket)
Bracket Adjustment 20° downward (only in non-pet immune applications), 20° left and right
ENVIRONMENTAL  
RFI Protection >30 V/m up to 1000 MHz.
Operating Temperatures -10°C to 50°C (14°F to 122°F).
Storage Temperatures -20°C to 60°C (-4°F to 140°F).
Compliance with Standards Designed to meet FCC Part 15 and Directive 1999/5/EC of the European Parliament. EN50131-1 Grade 2 (without bracket), Grade 1 (with bracket), Class II. EN50131-2-2.
PHYSICAL  
Dimensions (H x W x D) 117 x 65 x 47 mm. (4-5/8 x 2-9/16 x 1-7/8 in.).
Weight 92 g (3.25 oz) without bracket, 107 g (3.75 oz) with bracket.
Color White
PATENTS U.S. Patent No. 5,693,943


MCT302 - Visonic Wireless Door/Window Transmitter
In Stock: Usually leaves our warehouse same business day

POWERMAX+KIT2 - Visonic Powermax Plus Security System Kit
In Stock: Usually leaves our warehouse same business day

MCT234 - Visonic Wireless KeyFob Transmitter
In Stock: Usually leaves our warehouse same business day

MKP-150 - Visonic Wireless Keypad
In Stock: Usually leaves our warehouse same business day


Home Security MagazineSecurityWorldNews.com
Home Security Magazine
Security System ForumDiySecurityForum.com
Security System Forum
Copyright © 2000 - 2009 The Home Security Store, Inc. All rights reserved.