Water damage can be one of the most costly disasters that can occur within your home or business. Certainly, time is of the essence when it comes to an event like this, and that's why the WA-1000 is the most reliable water alarm system around because it notifies you instantly via telephone when water-related damage has occured within your home.
The system has an easy installation process and requires only that you connect it to any available telephone jack. What makes this unit truly sophisticated, however, is its ability to accommodate up to TEN wireless water detection sensors. What this means is that several sensors can be placed anywhere in your home and can all be controlled from a single base-station. Adding these sensors is "plug and play" simple and requires no dip switches to change. Once damage occurs, the system will not only notify you via telephone of the emergency, but because each sensor has its own unique ID, you'll also know exactly where the water problem is occurring. The WA-1000 will call you continuously until the alarm condition is acknowledged.
Base Station
This is the device that plugs into your existing telephone line and calls you if alarm conditions are detected at your monitored location. The Base Station communicates with the wireless water sensors and will alert you if one of the WaterSiren sensors detects water, if the battery in the sensor requires replacing or if the sensor has lost communication with the Base Station.
Wireless WaterSiren Sensor
The Wireless WaterSiren sensor has a detachable sensor pad. When water crosses the two little metal pads on the sensor, the WaterSiren will sound a 90 decibel alarm and via wireless communications, trigger the Base Station to call your programmed phone numbers to alert you of a water emergency. The sensor also communicates the battery and communication status to the Base Station. You can add up to NINE additional water sensors to the system.
Telephone Cord
A telephone cord is supplied to connect the Base Station to a telephone wall jack at your monitored location.
Features:
- Calls you when water is detected by any sensor, if power is out or on low battery in any sensor or base station
- Remotely check the status of all sensors, including water presence, power and battery status
- Continues to call until the alarm condition is acknowledged
- Identifies which sensor is detecting the water problem
- "Smart" sensors can be added for a total of up to ten total wireless sensors
- Custom record alarm and greeting messages
- No monitoring fees or installation charges.
Water damage can occur anywhere:
- Sump Pump/Basket
- Washing Machine
- Basement
- Hot Water Heater
- Attic Air Conditioner
- Toilet
- Ice Machine
- Hot Tub
- Dishwasher
(1) Base Station Receiver with built-in telephone dialer
(1) Wireless Water Siren Sensor (add up to 9 additional sensors)
(1) Power Adapter
(1) Telephone Cord
(1) Instruction Manual