0 items

MCS-730-AC - Visonic Wireless Outdoor Siren with Blue Strobe

Manufacturer: Visonic SKU: MCS-730-AC

Rating:

[4] Write a Review | Read Reviews

In Stock: Usually leaves our warehouse same business day

Warranty: 12 Month Warranty

Return Policy: 30 Day Money Back Guarantee

Tech Support: Free Lifetime

Burglary is on the rise in the neighborhood where my business is at. That’s why I installed this siren outside my store. Therefore, if an alarm is triggered the siren sounds and the flashing LEDs are activated. Not only will this scare off the intruder, but alert others and the police that something has gone wrong.

Price: $129.00

E-mail a friend

Image Viewer

stuff

The MCS-730-AC is a fully wireless outdoor siren, designed for installation in areas in which wiring action is difficult or impossible. It is compatible with control panels such as PowerMax Pro, PowerMaxComplete, PowerMaxExpress or Visonic newer panels.

The MCS-730-AC is powered by an External 9VAC Adaptor and non-rechargeable backup battery, which enables very long operation time without replacing the battery. The MCS-730 AC complies with PowerMax+ also.

Features:

Versatile solution fits varied design needs
Contemporary, sleek design with choice of red, blue, amber or transparent strobe light lens
Large free screen-print area available for company logo and information
Highly reliable and cost-effective
Two-way fully-supervised communication with the control panel
Comfort light (LED) flashes every few seconds to indicate that the siren is active and deter intruders.
Two diversity antennas for optimal wireless performance
Audible and visual notifications of intrusions, fires, low battery voltage, and communication disruptions
Issues a different alarm sound for burglaries and fires
Audial arming and disarming confirmation
110dB piezo siren
High-power strobe light
Double tamper protection (wall and cover)
IP55 rating, with increased protection from dust and moisture
Robust design for protection against harsh external conditions - including UV radiation from direct sunlight
Easy to install and maintain
Fully wireless, battery-operated, with no power supply required
Convenient and rapid no-mess installation
Self-test - for checking the siren and strobe lights prior to installation

Rating:

(2.75) # of Ratings: 4

Sort: New to Old RE-SORT REVIEWS:

Showing comments 1-4 of 4

1. william on 5/8/2012, said:

Can not buy a replacement battery

Was this comment helpful? yes no (0 people found this comment helpful, 0 did not)

2. Anonymous User on 12/16/2011, said:

I've just received the wireless siren and enrolled it to the system in 1 minute, I give that 5 stars, very loud and the light strobe works good!

Was this comment helpful? yes no (3 people found this comment helpful, 0 did not)

3. Garrey on 8/31/2011, said:

Doesn't work with Powermax+ despite the instructions saying it should.

Security Advisor Comment
When enrolling to the PowerMax+, the internal jumper must be set to the "PM+" position. Important Note: The siren is ready to operate 30 seconds after the enrolling. Pre-enrolled sirens are ready to operate 30 seconds after power up. The alarm system must recognize the siren's unique identification code for command delivery and supervision. To enroll the siren into the alarm system memory, refer to the ENROLLING section of the alarm system installation instructions, and momentarily press the Self-Test button

Was this comment helpful? yes no (3 people found this comment helpful, 1 did not)

4. Anonymous User on 6/22/2011, said:

This unit is much larger than I expected but I was mounting it on the flat ceiling of a covered back porch so not an issue. Got one false alarm on the tamper but after adding additional screws have had none since. Extremely loud wear ear guards when testing if you are close bye. Neighbors called in my alarm after an attempted break in. Easy to hear the chirp for this unit's arm away and disarm away from the driveway or front of the house too. Light does not flash when armed on the current model to save battery life. Unit does not chirp when arming home which is nice as people might be asleep.

Was this comment helpful? yes no (10 people found this comment helpful, 0 did not)

Showing comments 1-4 of 4


Siren Type	One Piezo 109 db.Sound Pressure Level @ 1m, 1.8-3.5 kHz, sweep frequency 7 Hz. Additional piezo is optional.
AC Power Supply Adaptor (MCS-730 AC only)	120 VAC, 60 Hz / 9 VAC, 0.35 A min. (in the U.S.A.)
Battery	3.6V/14.5A/H Lithium battery (EVE ER34615M/w200). Visonic assembly cat. No. 0-9912-K.
Caution!	Risk of explosion if battery is replaced by an incorrect type. Dispose of used battery according to the manufacturer's instructions.
Battery Life Time	3 years (taking into consideration a typical alarm of 4 minutes Piezo + strobe operation per week)
Current Consumption	Standby - 250uA average, Operation -300mA average
Compliance with Standards	EN 50131-1 Grade 2 Class 4, EN50131-4, EN301489, EN50130-4. EN50130-5. ETSI EN 300 220, IP55, CFR47 part 15. Designed to comply with Belgium / TO14, Sweden/SSF1014
Operating Frequency (MHz)	315, 433.92, 868 95
Supervision Time	5 minutes
Strobe Light	Pulsed @ 1 sec
Dimensions (LxWxD)	11-5/8 x 7-5/16 x 2-1/2 in
Color	Blue
Operating Temperature	-27.4"F to 158"F RH humidity 75%
Weight	34 oz


Visonic MCT-302 Wireless Door Window Magnetic Contact Transmitter In Stock: Usually leaves our warehouse same business day	Visonic Next K9-85 MCW 85lb Wireless Pet Immune Motion PIR Detector In Stock: Usually leaves our warehouse same business day	PPRO211GSM - Visonic Power Max Pro Kit with Built-in GSM In Stock: Usually leaves our warehouse same business day	Visonic MCT-234 4 Button Miniature Wireless Keyfob Transmitter In Stock: Usually leaves our warehouse same business day

Spec Sheet Downloads: 286	Download Size: 165 KB

Installation Guide Downloads: 522	Download Size: 1153 KB