0 items Tech Support

MCT-302PERS - Visonic Wireless Transmitter for Amber Kit

MCT-302PERS - Visonic Wireless Transmitter for Amber Kit
Manufacturer:  Visonic Security Systems  SKU:  0-100231
Rating: [0]   Write a Review | Read Reviews
In Stock
Usually leaves our warehouse the same business day.
Price:  $35.95

Image Viewer  Show Picture 1

The MCT-302 is a fully supervised PowerCode magnetic contact transmitter. The transmitter includes a built-in reed switch (that opens upon removal of a magnet placed near it) and an auxiliary hard-wired input, programmable as either N.C. Or E.O.L., for use with additional sensors - push-buttons detectors, door contacts, etc.

Rating: (0.00)   # of Ratings: 0   

There are no comments for this product.
Frequency 315, 433.92, 868.95, 869.2625 or according to local requirements (UL has only investigated at 315 MHz)
Transmitter's ID Code 24-bit digital word, over 16 million combinations, pulse width modulation
Overall Message Length 36 bits
Alarm Inputs 2, one internal and one external, with a separate 24-bit transmitter ID each
Auxiliary Input Circuit Type N.C./E.O.L. Selected with DIP switch
E.O.L Resistor Required 47kΩ
Message Repetition Repetitive transmission (once every 3 minutes) or one-shot, as selected with on-board Dip Switch
Supervision Signaling at 60-min (USA) or 15 min (Europe) intervals, or according to local standards
Response to Tamper Event Tamper report every 3 minutes (until tamper switch is restored)
Power Source 3 V Lithium CR-2 type battery, Panasonic or Sanyo only
Battery Life Expectancy 3 Years
Battery Supervision Automatic transmission of battery condition data as part of any status report
Operating Temp 32 F to 120°F
Dimensions 3-3/16 x 1-1/4 x 1 in
Weight 1.9 oz