0 items Tech Support

JETUL - Visonic PIR Motion Detector w/ Dual Creep Zones

JETUL - Visonic PIR Motion Detector w/ Dual Creep Zones
Manufacturer:  Visonic Security Systems  SKU:  JETUL
Rating: [1]   Write a Review | Read Reviews
Out of stock:

This item is no longer available for purchase.

Price:  $17.50
Image Viewer  Show Picture 1

The JET is a highly compact passive infared detector designed for top-notch performance and high immunity against false alarms. It can be surface mounted or corner mounted and has a soft featured, streamline shape that blends into most interior decors.

The JET is especially notable for its dual creep zone lens with 4 beams and also for its efficient temperature compensation circuitry, incorporated to stabilize the detcetion range over a wide range of operating temperatures. The pyroelectric sensor is enclosed in a sealed chamber , protected from insects and air drafts. Four lenses are available, for a variety of residential and commercial applications. The appropriate lens must be selected according to the area to be covered.

Rating: (4.00)   # of Ratings: 1   

Sort: New to Old RE-SORT REVIEWS:

Showing comments 1-1 of 1
1. Darin from Texas on 9/21/2012, said:

Nice quite unit. Requires six lead wire to acomidate the NC tamper switch. I wired it with four lead and left the tamper disconnected. Three pulse detection wasn't cutting it for me. Set it at single and works great.

Was this comment helpful? yes no   (0 people found this comment helpful, 0 did not)
Showing comments 1-1 of 1
Adjustment Vertical +2° to -12° calibrated scale
Creep Zones Two look-down creep zone lenses provide 4 creep zone beams
Voltage 9 to 616 VDC
Current 17 mA at 12 VDC, 21 mA at 16 VDC
Alarm Output Normally clodsed (fail0safe) contacts. 18-ohm resistor in series with contacts. Rating - 0.1 resistive /30VDC
Tamper Output Normally closed. Rating 50mA Resistive/30 VDC.
Alarm Period 2-3 seconds
Pulse Counter 2 position selector, 1 or 3 pulse operation.
LED Walk Test, enabled or disabled with internal link.

Dual-element low noise pyroelectric sensor.

MOUNTING Flat or corner mounting (no additional brackets are required)
Mounting Height Up to 3.6 m (12ft)
Operating Temperature -10°C to 50°C (14°F to 122°F).
Storage Temperature -20°C to 60°C (-4°F to 140°F)
RFI Protection Greater than 30V/m to 1000 MHz
Dimensions 110 x 45 x 34 mm (4-5/16 x 1-3/4 x 1/5/16 in.)
Weight 68 g (2.4 oz)
Color White
Installation Guide
Downloads: 169
Size: 680 KB