NightGUARDIAN Motion Light Sensors enhance convenience and security by automatically turning on one or more lights or other devices whenever presence is detected. STEINEL sensor switches are extremely flexible. They are designed for use with one or more lights up to 600 watts. With no minimum load requirement they can be used with low wattage appliances such as fluorescent lamps, alarms and video cameras. Our sensors are rain-tight and may be mounted inside or outside. Best of all, these sensors can be wired to any electrical layout. There is no need to re-wire or invest in an expensive whole-building system.
140° adjustable horizontal zone.
Tilt & Swivel Head:
270° horizontal, 65° vertical range aiming capability.
40 feet when mounted at a height of 8 feet.
Dual lens detects motion beneath sensor.
Limit detection zone as desired.
Switching capability up to 600 watts (wire in parallel).
No Minimum Load:
Will switch flourescent lights and other low voltage devices.
Available in black or white.
Resets to sensor mode after 4 hours.
May be mounted anywhere (IP54 rating).
Lights shut off between 10 seconds and 15 minutes after last detected movement.
Select when sensor switches; from full daylight to complete darkness (2-2000 lux).
Built-in surge protection with auto-reset.
Precision molded lens is distortion free and watertight.