0 items Tech Support

AX-200TFR - Optex Wireless 200ft Photoelectric Detector

AX-200TFR - Optex Wireless 200ft Photoelectric Detector
Manufacturer:  Optex  SKU:  AX-200TFR
Rating: [0]   Write a Review | Read Reviews
In Stock
Usually leaves our warehouse the same business day.
Price:  $462.67

Image Viewer  Show Picture 1

The New AX-100TFR and AX-200TFR from OPTEX is a Revolution in the perimeter security industry, offering a significant cost saving alternative to a traditional hardwired system. No trenching is required, drastically reducing installation costs. The unit comes wireless ready with a multi functional back box and is compatible with most manufacturers wireless systems. The AX-TFR series comes with four 3.6V batteries, with an avg. lifespan of 5 years on the 100ft model and 3 years on the 200ft model.


  • Significant cost saving alternative to traditional hardwired systems
  • Long battery life (Approx. five years for the 100TFR and three years for the 200TFR)
  • Low battery output and LED (Separate wireless transmitter is required to monitor)
  • Works with most manufacturers wireless system
  • D.Q. circuit (environmental disqualification)
  • IP 55 rated

* Requires 4 transmitters if going to utilize the tamper features.
* Requires 2 transmitters if not going to utilize tamper features.

Transmitter Compatibility List: (Visonic: MCT302) (DSC: WS4945) (Ademco: 5816) (Caddx: NX-650) (Rokonet: WT71M433USA)

Setup w/ Tamper   Setup w/o Tamper

4 transmitters
2 for receiver
2 for transmitter

  2 transmitters
1 for receiver
1 for transmitter

1 for trigger
1 for tamper

> receiver  
1 for trigger
1 for tamper
> transmitter  
Rating: (0.00)   # of Ratings: 0   

There are no comments for this product.
Range 60mm(200ft.)
Maximum Arrival Distance 530m (1,740ft.)
Detection Method Infared Beam Interruption Detection
Beam Frequency selection 4 Channel
Interruption Variable between 50, 100, 250, 500msec (4 steps)
Power Source 3.6V 13.0Ah : LSH20 lithium batteries manufactured by SAFT (not included)
Transmitter: 2 units
Receiver: 2 units
Current Draw 810uA T:490uA + R:320uA
(at 25°C, 3.6VDC)
Transmitter 3 years
Receiver Alarm Output 5 years
Alarm Period 2 sec (± 1) nominal
D.Q. Output Form A/B-Solid State Switch : 3.6 VDC, 0.01A
Low Battery Output Form A/B-Solid State Switch : 3.6 VDC, 0.01A
Tamper Output for Front Cover Form C : 3.6VDC, 0.01A
activates when cover removed. (Receiver only)
Tamper Output for Back Cover Form C : 3.6VDC, 0.01A
activates when either back box or chassis is removed from the installment.
Alarm Indicator (Receiver) (1) Light On - IR Beam not received
(2) Flickering Light - IR Beams not received sufficiently.
(3) Light Off - IR Beams received.
Power (Transmitter) Power ON : ON
Low Battery Voltage Reduction : flicker
Operating Temperature -4°F - +140°F (-20°C - +60°C)
Operating Ambient Humidity 95%(Max.)
Alignment Angle Mounting ± 90° Horizontal, ± 5° Vertical
Indoor/Outdoor, Wall/Pole/Tower mounting
(Optional main unit mounting brackets are required, when the units mount in the tower.)
Weight 56.5oz (Total weight of transmitter + receiver, excluding accessories)
International Protection IP55
Spec Sheet
Downloads: 216
Size: 1382 KB

Installation Manual
Downloads: 257
Size: 2343 KB