Honeywell's versatile VISTA-15P is the ideal choice for any residential installation. VISTA-15P gives you the ability to send alarm signals and upload/download via an Internet Protocol (IP), improving the speed at which information can be delivered to and from the control panel. In addition, when used with an AlarmNet Internet or digital communicator, the VISTA-15P can be installed in premises without TELCO lines - guaranteeing communication independent of any home infrastructure. Hardwired expansion, graphic keypad support, two-wire smoke detectors, scheduling options and a host of end-user and installer features separate the VISTA-15P from all other six-zone panels - offering you and your customers the most panel for the dollar.
Features
- IP alarm reporting and uploading/ downloading capability for Internet and Intranet use via 7845i, 7845i-ENT, 7845GSMR or 7845i-GSM
- Six on-board hardwired zones
- 16 hardwired expansion zones totalling 22
- 26 wireless expansion zones
- Supports two graphic touchscreen keypads
- Eight independent keyfob zones allow wireless keys to be programmed without using any of the 26 zones
- Eight output devices
- Relays (Model 4204 Relay Modules, or 4229 Expansion Module), and/or
- X-10(R) devices (when used with a 1361X10 Transformer)
- Two low current on-board trigger outputs
- 50 Event Log viewable at system keypads with time/date stamp
- 32 system user codes
- Two installer configurable zone types allows the installer to "create custom zone types" by assigning all zone attributes
- Multiple actions on output devices depending on system "state" - Turns light off when system arms
- Turns same lights on when system disarms
- Flashes same lights when system is in alarm
- Built-in phone line cut monitor with programmable delay and annunciation options
- Display on system keypads
- Trigger local sounders
- Trigger system bell
- Supports four-wire and up to 16 two-wire smokes
- Works with Sentrol CleanMe(TM) maintenance signal
Valuable End-User Features
- Now viewable on system keypads:
- Exit countdown
- Time and date display
- Event log
- Auto keypad backlighting on entry
- Keyswitch arming
- Programmable macro buttons and single-button arming
- A variety of wireless remote controls for single-button operation
- User Scheduling
- Automatically activates X-10 and relays at programmed times
- Latchkey reports to pagers
- Auto arm/disarm
- "User access" time windows
- Supports up to two numeric pagers
- VIP Module allows system control from any touchtone phone
- Chime by zone
Security Dealer Features
- Automatic System Load Shed
- During extended AC power fail, the system battery will be disconnected to prevent irreversible battery failure. Reduces service calls to replace batteries.
- Dynamic Signaling
- Reduces redundant reporting to the central station when multiple reporting methods are used; i.e. digital dialer and AlarmNet Radio
Free Shipping: This product qualifies for free shipping
