844-474-7011

Optex Outdoor Wireless Dual Motion Detector- FTN-RRHW

Be the first to review this product

Finally the ability to quickly link the outside of a home to what you expect from a security system. Give real coverage to driveways, outdoor living spaces, entry ways, garage & sliding doors, or even side yards and gates. Easily and quickly add FitLink (FTN-RRHW) to a new or existing Honeywell 5800 wireless alarm system.

Brand: Optex
Part Number: FTN-RRHW

Availability: In stock

$89.00

Description

Details

Finally the ability to quickly link the outside of a home to what you expect from a security system. Give real coverage to driveways, outdoor living spaces, entry ways, garage & sliding doors, or even side yards and gates.

Easily and quickly add FitLink (FTN-RRHW) to a new or existing Honeywell 5800 wireless alarm system.

FitLink wirelessly transmits alarm and low battery that lasts up to 5 years. No wiring for power required.

Dual PIR detectors and SDMA logic allow extremely stable detection, even outdoors with small animals present.

To reduce false positives and missed detections from enviromental conditions, every motion is analyzed by the detector before signaling a detection.

Additional Info

Additional Info

Part Number FTN-RRHW
What's in the box

(1) Optex Outdoor Wireless Dual Motion Detector- FTN-RRHW

Reviews

Write Your Own Review

You're reviewing: Optex Outdoor Wireless Dual Motion Detector- FTN-RRHW

Specifications

Detection method- Passive infrared

PIR coverage- 5 × 1 m (16'5" × 3'3")

Detection length limit- 2 m, 5 m (6'7", 16'5")

Detection width- 3'3" wide at 16'5" / 24" wide at 6'7"

Detectable speed- 0.3 – 1.5 m/s (1' – 4'11"/s)

Sensitivity- 2.0°C (at 0.6 m/s) (3.6°F (at 2'/s))

Power source- CR123A Lithium battery

Current draw- 11.2μA standby / 23mA max. at 3 V DC

Alarm period- 2.0 ±1.0 sec.

Warm-up period- Approx. 120 sec. (LED blinks)

Alarm output-  N.C./N.O. Selectable-Solid State Switch 10 V DC 0.01 A (max.)

Trouble output-  N.C./N.O. Selectable-Solid State Switch 10 V DC 0.01 A (max.)

LED indicator:
Enable: During DIP switch 1 (WALK TEST MODE) or DIP switch 4 (LED) ON
Disable: During normal operation
Light/Blink: Warm-up, alarm, masking detection (FTN-RAM-PT only)

RF Interference- No alarm 10 V/m

Operation temperature- -20 – +60°C (-4 – +140°F)

Environment humidity- 95% max.

Weatherproof- IP55

Mounting- Wall (Outdoor, Indoor)

Mounting height- 0.8 – 1.2 m (2'7" – 3'11")

Weight 180 g (6.4 oz.) without wireless transmitter and battery

Accessories- screw (3 × 20 mm) × 2