The NX-595E is an IP communication module that can be added to a NetworX V2 family security product (NX-4, NX-6, NX-8, NX-8E) to provide remote access and alarm reporting via standard Internet connections (IP). The NX-595E can utilize two connection methods to your central monitoring station. It can connect directly to an Osborne Hoffman (OH) NetRec receiver. Alternatively, it can use UltraSync™ services. Contact your central monitoring station to determine their preferred connection method.
The security panel can be configured for alarm reporting exclusively over IP when PSTN connectivity is no longer available. Alternatively, it can utilize the PSTN for failover connectivity in the event the IP communications path is lost.
The NX-595E provides a web browser interface accessible via a local computer, smart phone or tablet to configure the device. Additionally, UltraSync™, an Apple® iOS® or Android® application, is available for remote configuration and end user control of the security system including control of two output relays. Up to four zones are also supported with zone doubling (not available on NX-4 panels). Three email addresses can be programmed into the NX-595E to allow alarm and trouble events to be emailed to the end user.
|What's in the box||
Write Your Own Review
Compatibility: Interlogix™ NetworX V2 control panels (NX-4, NX-6, NX-8, NX-8E)
Operating Voltage: 12 VDC, supplied from control panel
Current Draw: 250 mA nominal, 320 mA (both relays energized)
Maximum Relay Current: 1 A (per relay)
Maximum Relay Voltage: 24 VDC, 30 VAC
Operating Temperature: 32°F~120°F (0°C~49°C)
Storage Temperature: -30°F~120°F (-34°C~49°C)
Maximum Humidity: 90% relative humidity non-condensing
Dimensions: 3.2 x 6.0 in. (81 x 152mm)