V20P60SELFKIT- Honeywell Vista20P Self Monitoring Security Kit

The high capacity, feature-rich Honeywell VISTA-20P lets you deliver more value to your customers on each and every sale with up to 48 zones of protection, Internet uploading/downloading, graphic keypad support and dual partitions. The Honeywell VISTA-20P gives you the ability to send alarm signals and upload/download via an Internet Protocol (IP), improving the speed at which information can be delivered to and from the control panel. In addition, the VISTA-20P, used with an AlarmNet® Internet or 4G communicator can be installed in premises without TELCO lines. The panel’s installation advantages, innovative end-user benefits and robust system capacity make the value-priced Honeywell VISTA-20P an ideal choice for higher end installations.

Self-Monitoring Alarm System Features

• IP alarm reporting and uploading/ downloading capability for Internet and Intranet use via iGSMV4G, 7845i-ENT, GSMV4G or GSMX4G
• Supports four graphic touchscreen keypads
• Wireless keys can be programmed without using zones
• Eight on-board hardwired zones standard (15 when Zone Doubling feature is used)
  – 40 hardwire expansion zones
  – 40 wireless expansion zones
• Two low current on-board trigger outputs
• 100 Event Log viewable at system keypads with time/date stamp
• 48 system user codes assignable to either partition
• Expandable to 48 total zones when used with hardwired and/or wireless expansion modules
• Two independent partitions plus a common partition
  – Global Arming from any system keypad
  – Go to function to view or operate one partition from the other
  – Separate partition account numbers
• 16 output devices
  – Relays (Model 4204 Relay Modules, or 4229 Expansion Module)
• Four installer-configurable zone types allows the installer to create custom zone types by assigning all zone attributes
• Supports four-wire and up to 16 two-wire smokes
  – Works with Sentrol CleanMe™ maintenance signal
• Multiple actions on output devices depending on system state
  – Turns lights off when system arms
  – Turns the same light on when system disarms
  – Flashes same lights when system is in alarm
• Built-in phone line cut monitor with programmable delay and annunciation options
  – Display on system keypads
  – Trigger local sounders
  – Trigger system bell

Valuable End-User Features

• Viewable on system keypads:
  – Exit countdown
  – Time and date display*
  – Event log*
• Auto keypad backlighting on entry
• Keyswitch arming
• Programmable macro buttons and single-button arming
• Supports a variety of wireless remote controls for single-button operation
• User Scheduling
  – Latchkey reports to pagers
  – Auto arm/disarm
  – “User access” time windows
• VIP Module allows system control from any touchtone phone
• Chime by zone

*Self-Monitoring alarm system requires custom alpha keypad

VISTA® CONTROL PANEL

• Aux. power 12VDC, 600mA maximum
• Seven hour standby at 400mA aux.  load with four amp hour battery
• 16.5VAC/25VA transformer
•  Alarm output 12VDC, 2.0 amps max.
  - For UL installations, combined aux. and  alarm output cannot exceed 700mA
• WAVE-2 siren
• IS2535 Motion Sensor
• Battery
• Jack
• Cord

6160 Custom Alpha Keypad

• Single four-wire run is all that’s required
• custom alpha display is easy to read, with large characters and simplified descriptions
• Four larger function keys can be programmed for one touch operation and are accessible even when the door is closed

Envisalink 4 Internet Alert Module

• Remote Arm/Disarm/Zone Bypass/PGM Control
• Event Logging
• Alerting by e-mail or SMS
• Network Supervision
• See at a glance system status on a map in the EyezOn portal
• Mobile Portal optimized for iPhone, Android, and Blackberry. Control your alarm through your smart phone
• Option of full-ULc grade alarm monitoring over EnvisaLink 4
• Best price in the industry for full IP-Based monitoring
• Monthly, 1 Year and 3 Year terms available
• Receive monitoring certificate and take advantage of Insurance Company Discounts