The CDMA-L3 is an optional communication module intended for use with Lynx Plus Series controls, and provides cellular communication with the AlarmNet network for backup delivery of alarm and other messages to the monitoring central station. The module also supports voice communications between the control panel and the central station.
Honeywell's CDMA-L3 cellular communication module transmits signals via the CDMA 1X RTT network and forwards them to the central monitoring station.
•Quick connection to compatible Lynx Plus Series control panels.
•Simple programming using a 7720P programming tool or via the AlarmNet Direct Website.
•Reports fire, burglary, and status messages.
•Allows uploading and downloading of control panel data via CDMA network.
•Uses 2-way ECP communication with the control.
•Enables two-way voice (AAV) communication between the control and central station via CDMA network.
•Sends reports in Contact ID format.
•Supports remote control of alarm system via Remote Services Feature.
•Fully powered (primary and backup battery) from the control.
The CDMA-L3 provides the following types of supervision and module fault detection:
•Network communication failure: In the event the AlarmNet network does not hear a supervisory message from the module within a specified time“Supervision”option, 24 hours, 30 days, or none), AlarmNet notifies the central station of a communication failure.
•Communication path failure: In the event the module detects a communication path failure, the control panel can be notified of a trouble condition with the module after a specified time has elapsed.
Remote Services Features
The Remote Services Features can only be used with Lynx Plus Series Series controls Revision 16 or later. Multi Mode (E-mail notification) is intended as a convenience for the user, and does not replace Central Station reporting of critical events (alarms, troubles, etc.).
Remote Services allow the end user to communicate with their Security System remotely via several features. Availability of this service is controlled by the dealer via the web-based programming tool on the AlarmNet Direct website. Once enabled, the specific programming fields associated with these features can be programmed either remotely using the AlarmNet Direct website or locally using the 7720P Programming Tool. These web services allows users to:
•Receive e-mail and text message notification of system events (Multi-Mode feature)
•Access their security system from a computer via a website (Remote Access feature)
•Perform system functions and receive confirmations using text messages (SMS feature)The CDMA-L3 module requires an AlarmNet account. For new installations, please obtain the account information from the central station prior to programming this module.
|What's in the box||(1) Honeywell CDMA-L3 Internal GSM Module for LYNX Plus w/ Two-way Voice|
Write Your Own Review
Physical Dimensions: 5.625" x 2.25"
Input Voltage: 12VDC (powered by the Lynx Plus Series Control) (Range: 5.5 VDC-12 VDC)
Quiescent Current: 40mA
Peak Current During Transmit: 300mA
Operating temperature: -20ºC to +55ºC, for ULC installations 0ºC to +49ºC
Storage temperature: -40º to +70ºC
Humidity: 0 to 95% relative humidity, non-condensing
Altitude: to 10,000 ft. operating, to 40,000 ft. storage
•Dual-band support for both the 800MHz cellular and 1.9GHz PCS bands.
•Adheres to CDMA authentication as specified in CDMA 1X.
•Support for IS-95A/B and CDMA 1X Release 0/A.