Expert Advice You Can Trust!

888-501-7870

Ademco Wireless Heat Detector

See other Honeywell products

Be the first to review this product

ADEMCOs 5809 wireless fixed heat and rate-of-rise temperature sensor offers expanded fire detection and installation flexibility. It is ideal for hard to wire locations and
Brand: Honeywell
Part Number: 5809

Availability: More than 5 in stock

Hurry! Ships today if ordered within 20 minutes!

$52.95
Honeywell

We Offer Lowest Prices
Guaranteed

Same Day Shipping on orders
placed before 2 pm PST

Highest Quality Products
Guaranteed

30 Day Money Back Guarantee

Description

Details

Honeywell's 5809 wireless fixed heat and rate-of-rise temperature sensor offers expanded fire detection and installation flexibility. It is ideal for hard to wire locations and applications that require more than smoke detection. With no wires to run, the 5809 is fast and easy to install.

The 5809 combines both rate-of-rise and fixed temperature sensors. Fires typically cause a rapid rise in temperature in the surrounding area. The 5809's rate-of-rise thermostat senses the rise in temperature and signals an alarm if the increase is 15deg. or more per minute. A built-in fixed temperature sensor will also signal an alarm if the environmental temperature rises above 135deg.F. The 5809 is UL Listed (UL521) and CSFM approved for commercial and residential applications.

Features

  • Contains a built-in transmitter which can send alarm, supervisory and battery condition messages to the system's receiver/control unit
  • Powered by a three-volt lithium battery. If the battery voltage gets too low, the 5809 sends a low battery signal to the control panel
  • Features a tamper switch, which causes a trouble signal to be sent to the control if the unit is removed from the mounting base
  • UL Listed for Commercial (when using 5881EH Receiver) or Residential applications

Additional Info

Additional Info

Part Number 5809
What's in the box (1) Ademco Wireless Heat Detector

Reviews

Write Your Own Review

You're reviewing: Ademco Wireless Heat Detector

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Rating

Specifications

Power 3V lithium battery (Duracell DL123A, Panasonic CR123A, Sanyo CR123A, Varta CR123A)
Operating temperature 40° to 140°F (6° to 60°C)
Rate-of-rise temperature 15°F (8°C) increase per minute (NOTE: Rate-ofrise sensor does not operate above 38°C)
Fixed temperature 135°F (57°C)
Maximum spacing 50 ft x 50 ft UL, 30 ft x 30 ft FM (refer to National Fire Alarm Code Standard NFPA 72 for application requirements)
Dimensions 4.4” diameter/2/2” deep
Agency Listings UL 521 Listed for Commercial (when using 5881EH Receiver) or Residential applications
Wireless Transmission Path Test A good RF transmission path must be established from the proposed mounting location before permanently installing the detector. To determine that there is a good signal reception from the proposed location, perform the test procedure described in the installation instructions procedure.