The GE Interlogix TX-6310-01-1 wireless carbon monoxide (CO) alarm monitors the levels of CO gas and gives early warning when potentially dangerous levels exist. It does not detect fire, smoke, or any other gas. If a dangerous concentration of CO is detected by patented and field-proven electrochemical sensor, an LED indicator illuminates and an internal siren is activated in temporal 4 pattern. The CO alarm also transmits an alarm signal to the control panel within 15 seconds of detecting dangerous concentration of CO gas. The control panel activates its internal siren and reports the alarm condition to the central monitoring station (if the system is monitored). The CO alarm also detects low battery, wall tamper, and sensor end-of-life. These trouble codes are transmitted to the control panel. The alarm automatically resets when CO is no longer detected.
The TX-6310-01-1 wireless CO alarm is Listed and compliant with the ANSI/UL 2034 standard for CO alarms. It is intended for residential indoor dwelling unit applications and other areas approved by the authority having jurisdiction (AHJ). It is not intended for use in industrial applications.
The TX-6310-01-1 CO alarm is only compatible with Simon XT panels with firmware v1.4 or higher. Refer to the panel installation instructions for revision verification details. It is currently not compatible with other control panels. Please contact Technical Support for any questions regarding compatibility.
|What's in the box||(1) GE Interlogix Security Wireless CO Detector for Simon XT|
Write Your Own Review
|Compatible Panels||Simon XT (firmware 1.4 or greater) from UTC Fire & Security|
|Power||Three AA batteries|
|Battery Type||1.5 VDC alkaline|
|Required Batteries||Duracell MN 1500, Duracell MX1500, Energizer E91|
|Sensor Life||7 years|
|Supervisory Interval||64 minutes|
|Audible Alarm||Temporal 4|
|Alarm Response Times||70 PPM = 60-240 min. 150 PPM = 10-50 min. 400 PPM = 4-15 min.|
|Dimensions||4.68 x 2.75 x 1.85 in. (119 x 70 x 47 mm)|
|Storage Temperature||-4 to 140°F (-20 to 60°C)|
|Operating Environment||Temperature 40 to 100°F (4.4 to 37.8°C)
Relative humidity 10 to 95% noncondensing