The LSM-15 Wall Mounted switch is meant to replace a current wall switch in your home, apartment or condominium to make pre-existing overhead lights or switched outlets Z-Wave compatible. Inclusion of this switch allows remote ON/OFF control of loads connected. With Z-Wave devices you can set timers or remotely control your lights and appliances via a Z-Wave Alarm System or external transmitter.
It's simple. First, replace a current standard switch with the LSM-15. If your security system is contains Z-Wave control, you may have to program the switch into the system. Then, control your light switch directly through your alarm system or external Z-Wave transmitter!
Many home alarm systems also contain remote controlling via internet and/or smart phone. That means that if you have the LSM-15 installed, you can control your lights without ever stepping foot in your home. If you're going on vacation or just want the lights on when you get home from work, you can schedule times for the lights to go on and off (if your alarm system supports these capabilities).
The LSM-15 Wall Mounted 3-Way Switch is designed to work with other Evolve enabled devices and will act as a wireless repeater to insure that commands intended for another device in the network are received. This is useful when the device would otherwise be out of range. This is home automation made easy.
- 120 VAC, 60Hz
- Signal (Frequency): - 908.42 MHz, 9.6Kbps or 40Kbps capable
- Maximum Load: Resistive: 15 amps (1800 watts) maximum, 120 VAC; Motor: 1/2 H.P. maximum, 120 VAC; Incandescent: 960W maximum, 120 VAC.
- Range: - Up to 100 feet line of sight between the Wireless Controller and /or the closest Z-Wave device
- Z-Wave Version 4.52
- Network Inclusion
- Scene - Command Class
- Security Compatible:
- DSC panels require C24-HUB - DSC Gateway Module in order to control Z-Wave Devices.
|What's in the box||(1) Evolve Z-Wave 15A 120V Wall Mounted 3-Way Relay Switch|