Expert Advice You Can Trust!

888-501-7870

DSC 2-Wire Photoelectric Smoke Detector w/ Heat

See other DSC products

It goes without saying that every home or business requires a smoke alarm. The DSC 2-Wire Photoelectric Smoke Detector w/Heat is a sophisticated smoke detector that won't let you down. And since the unit is sensitive to both heat and smoke, it will eliminate the often expensive need to purchase additional equipment.
Brand: DSC
Part Number: FSA-210BT

Availability: More than 5 in stock

Hurry! Ships today if ordered within 7 minutes!

$27.84
DSC

We Offer Lowest Prices
Guaranteed

Same Day Shipping on orders
placed before 2 pm PST

Highest Quality Products
Guaranteed

30 Day Money Back Guarantee

Description

Details

It goes without saying that every home or business requires a smoke alarm. The DSC 2-Wire Photoelectric Smoke Detector w/Heat is a sophisticated smoke detector that won't let you down. And since the unit is sensitive to both heat and smoke, it will eliminate the often expensive need to purchase additional equipment.

Smoke Alarm
The smoke detector has a nominal fixed alarm sensitivity and it will go into alarm when the signal level exceeds the 'alarm' threshold and send the alarm signal to the control panel. During an alarm the LED will flash once per second and the siren will sound the evacuation temporal pattern (UL) or continuous beeps (ULC).

The detector automatically compensates for long-term environmentally induced changes to maintain a constant smoke sensitivity. When the drift compensation has reached its high or low limit adjustment, the detector will go into the trouble state.

Heat Alarm
The heat detector will go into alarm when the hear signal level exceeds the heat alarm threshold of (135deg.F/57deg.C); and send the alarm signal to the control panel. The detector will also go into heat alarm if there is a rapid increase in the temperature over a short period of time. During an alarm the LED will flash once per second and the siren will sound the evacuation temporal pattern (UL) or continuous beeps (ULC).

How It Works
Approximately every 7 to 8 seconds the unit tests for a smoke or heat alarm condition. During this sequence the unit also performs self diagnostic, and checks for faults. During normal operation the LED will flash every 50 seconds and the siren will not sound.

Remote Alarm - Interconnection
Multiple detectors (with sirens) can be connected using a polarity reversal module. When a fire alarm occurs, the panel will signal the module to reverse the polarity of the 2-wire loop. This will activate the sirens of all units connected on the loop.

Features

  • Fixed temperature and rate of rise heat detector
  • Able to connect to polarity reversal module

Additional Info

Additional Info

Part Number FSA-210BT
What's in the box (1) DSC 2-Wire Photoelectric Smoke Detector w/ Heat

Reviews

After reading that smoke alarms should be replaced every 10 years, ...Review by J. Morrris
Rating
After reading that smoke alarms should be replaced every 10 years, and not knowing the age of some in the house, we replaced them all with these smoke and they work great! (Posted on 1/8/14)
This detector is perfect for residential applications! I have ...Review by name withheld
Rating
This detector is perfect for residential applications! I have 5 of these hooked up to an Ademco Vista 20P panel and they function perfectly together. If you are looking for a fire detector to wire to your panel, this DSC detector will most likely fit your needs. (Posted on 4/9/12)
This is a great smoke sensor with minimal current draw. I'm ...Review by Robert
Rating
This is a great smoke sensor with minimal current draw. I'm using it with a DSC 1832 panel and was easy to wire and setup using only two conductor fire wire. It's also very easy to test by holding a magnet next to the unit's flashing pilot light. The magnetic test design is easier to use than a push button because you can put a magnet on a long stick to test on a tall ceiling; it would be hard to press a button using a stick. (Posted on 10/8/11)

Write Your Own Review

You're reviewing: DSC 2-Wire Photoelectric Smoke Detector w/ Heat

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Rating

Accessories

Add-on

Specifications

Dimensions 6 x 6 x 3
Weight 1 lb
Operating temp 32°-100°F
Humidity 5%-93% RH, non-condensing
Smoke Sensitivity ULC 2%±0.5%/ft obscuration
Smoke Sensitivity UL 3%±0.8%/ft obscuration
Heat Alarm 135°F
Siren Alarm Pattern UL Evacuation Temporal Pattern
Siren Alarm Pattern ULC Continuous Beeps