SPY - The smallest PIR available |
SPY Installation Manuals
|
SPY is the smallest PIR detector available, and is suitable for any application where unobtrusive detection is required.
|
APPLICATIONS
- Residential, Commercial and Museums
- Wall or Ceiling-mounted (flush-fitted)
- Covert installations
FEATURES
- World's smallest PIR detector
- Superior RF protection
- Pulse counter (on model 4)
- Miniature size - 19 x 70 mm (3/4 x 2-3/4 in)
- Flush mounts into a 22 mm (7/8 in) hole
- Special request-to-exit version available for access control
SPECIFICATIONS
Optical Detection Patterns:
- SPY 1 Long Range; narrow angle with coverage area of 11m x 17° (35 ft x 17°)
- SPY 4 Solid Curtain; with coverage area of 2 x 4 m (6 x 12 ft)
Electrical
- Voltage: 10 to 14 VDC. Current: 12.5mA
- Relay Output: Normally Closed (fail-safe) contacts, 18-ohm resistor in series with contacts.
- Rating - 0.1A resistive/24 VDC. Alarm Period: 2-10 seconds
- Pulse Counter: Models 2, 3 and 4. Factory set to 2 pulses
- Detector: Dual-element, low-noise pyroelectric detector
Mounting
SPY PIRs can be installed in a wall or ceiling and are available with both a collar and a front or rear mounting plate, depending on the model.
Environmental
- Operating Temperature: 0°C to 50°C (32°F to 122°F)
- Storage Temperature: -20°C to 60°C (-4°F to 140°F)
- RFI Protection: Greater than 10 V/M up to 1000 MHz
Physical
- Dimensions: Diameter: 19 mm (3/4 in) x Length: 70 mm (2-3/4 in)
- Weight: 30 g (1.1oz)
- Color: White
Accessories
-
SCS Small collar for in-wall or ceiling mounting
- SCL Large collar for in-wall, ceiling or behind-the-wall mounting.
- Both SCS and SCL are supplied with the SPY 1 and SPY 4

|
|