MCT302 - Visonic Wireless Door/Window Transmitter |
 |
TMCT-302 is a fully supervised PowerCode™magnetic contact wireless transmitter, that can be used in virtually all applications where an ordinary magnetic contact is normally used, and where hardwiring would be difficult or impossible.
APPLICATIONS
- Residential, commercial, industrial
FEATURES
- Fully supervised
- Auxiliary hardwire input
- Anti-collision signal protection
- 4-channel - switch selectable
- Long-life lithium battery
- Compatible with all PowerCode™receivers
|
|
|
|
|
APPLICATIONS
Residential, commercial, industrial
FEATURES
* Fully supervised
* Auxiliary hardwire input
* Anti-collision signal protection
* 4-channel - switch selectable
* Long-life lithium battery
* Compatible with all PowerCode™ receivers
DESCRIPTION
MCT-302 is a fully supervised PowerCode™ magnetic contact wireless transmitter, that can be used in virtually all applications where an ordinary magnetic contact is normally used, and where hardwiring would be difficult or impossible.
SPECIFICATIONS
Transmitter ID Code: 24-bit digital word - 16 million combinations
Overall Message Length: 36 bits
Alarm inputs: Built-in magnetic reed, plus 1 auxiliary input
Input circuit: NC/EOL selectable
Message Repetition: Every 3 minutes, or one shot - selectable
Supervision: Automatic status report at 1-hour intervals
Tamper Response: Report every 3 minutes until the tamper switch is restored.
Power Source: 3.6 V lithium battery
Nominal Battery Capacity: 1.2 Ah
Battery Supervision: Battery condition data transmitted as part of hourly status report
Compliance with standards: Meets FCC Part 15, ETS 300-220 and MPT1349
Operating Temperature: 0C to 49C (32F to 120F) |
|
|
|
|
| |
|
