ELK75 - ELK Interior Voice Siren |
| 
 |
| The ELK-75 is a self-contained Voice Siren mounted in an attractive surface mount enclosure. The enclosure features the exclusive ELK "Echo" design in which the sound comes out around the back of the speaker and no holes are present on the front of the speaker enclosure. It produces high quality prerecorded voice messages along with loud siren sounds. ELK-75 Interior Voice Siren features English and / or Spanish. Will Drive Additional Speakers (ELK-70 or ELK-1RT) |
|
|
| The ELK-75 is a self-contained Voice "Talking" Siren mounted in an attractive surface mount plastic enclosure. It produces high quality pre-recorded voice messages along with loud siren sounds. It features two input channels, bilingual voices (English and Spanish), and many unique options which allow it to be used with virtually any residential or commercial alarm installation. The voice messages and the siren alternately sound whenever one of the channels are activated. |
| This versatile Echo™ Series siren is designed to be heard but not seen!. Sound "echoes" off mounting surface from back plate edge. This unique contemporary siren has a smooth, paintable, "no grill" surface that easily blends with any decor. This siren mounts to any flat surface or single gang electrical box. The ELK-75 may be customized by use of removable on-board jumpers. For example: our MilliMiser™ option allows the already low current draw of the ELK-75 to be reduced even lower. This is ideal for controls with limited alarm output power. |
|
• Installer Friendly - Compact & Easy To Mount
• Two Input Channels, Burglar & Fire
• Bilingual Voice - English Or Spanish
• Temporal Coded Fire Signal
• MilliMiser™ Lowers Current Draw
• ComboTrigger™ For Single Outputs
• VolumeStep™ Slowly Increases Siren Volume
• Attractive "No-Grill" Surface Mount Enclosure
• May be Painted or Wallpapered
• Electrical "J" Box Mounting Holes
• Mounting Hardware Included
• Lifetime Limited Warranty |
• Operating Voltage:
• Current Draw:
• Sound Level:
• Max. Speaker Load:
• Size: |
10 to 14 Volts DC
1.25 Amps, 600 mA on MilliMiser™ , with one 8 Ohm speaker
110 db @ 1 meter, 14 vdc
4 Ohms
4.375" H x 6.375" W x 1.875" D |
|
|
|
|
