Mechanical Fixed Temp Alert (TA-40)
The simple low-cost TA-40 requires no power for operation. A mechanically fixed set point provides a dry contact closure output when the monitored temperature falls below the 39° deg F (4° deg C) set point. This contact output is used to active external low current/voltage alarm devises.
The simple TA-40 Temp switch is the perfect solution for simple low cost protection in homes, mountain cabins, or any unattended building. The unit will activate a hardwire or wireless alarm system if the temperature should fall below 40°F from its fixed internal sensor. The TA-40 provides positive protection and peace-of-mind to residential and business property owners concerned about the risk of frost shattered pipes and the water damage that follows. An added advantage is the unit's compact size, which enables it to be installed in virtually any setting without being noticed. Contacts above 40° F are normally closed and below 40° F are normally open.
Important: Install a Temp Alert on every level of your home or business to adequately protect against freezing. Do not use for freezer or cooler monitoring. Instead use a Digital Temp Alert unit with a remote sensor probe.
Typical Applications:
Residential or Vacation Homes
Commercial Buildings
Office and Computer Areas
Unattended Buildings
Greenhouses & Animal Buildings
Freezers and Refrigerated Rooms
Buildings with Controlled Climates
-
- Features:
-
- Requires no power for operation
- Fixed 39°F low set point
- Compact size
- Provides (1) dry contact opening output for alarm
- Easy surface mount - two screw - installation
- One year parts and labor; subject to conditions of limited warranty.
|
