The DCR-2500 - Dakota Alert Duty Cycle Receiver will receive a signal from the DCPT-2500 - Dakota Alert Duty Cycle Probe Alert Transmitter, which can be placed as much as an impressive 1,500 feet away from the receiver. The DCR-2500 requires no license to operate and features four chime tones to choose from.
The DCR-2500 receiver comes with 4 form "C" relay outputs and 1 12V output which can be programmed to activate for:
- 1 seconds
- 10 seconds
- 60 seconds
- 10 minutes
Moreover, the DCR-2500 receiver also features a brand new "Reminder" Feature. What this means is that you can choose to allow the unit to flash small LED lights and/or have it sound an audible "Beep" every 15 minutes after an event is triggered in case you missed it.
- Built-in volume control
- Four Different Chimes Tones
- Volume Control
- LED Reminder Lights
- Comes with 12V Power Supply
PLEASE NOTE: The Dakota Alert 2500 series alarms DO NOT work with the Dakota Alert 3000 series.
|What's in the box||(1) Dakota Alert DCR-2500 Wireless Receiver
(1) 12V Power Supply
- I have one of the buried coil driveway alarms, 1000 ft from my ...Review by Rancher's husband
- I have used other driveway vehicle/motion detector systems for ...Review by name withheld
In all, this is the best driveway monitor system I have stumbled upon. In addition, while I don't have the version, there is an option to transmit the signals to a portable device. Not a feature I really wanted, but, I have a buddy who carries it with him so he has notice when he is in the barn or out in a field. (I cover that by simply having a receiver in the barn and house.)
Good system. Top notch. (Posted on 7/2/11)
Write Your Own Review
|Operating Voltage||12VDC - Power Supply Included|
|12 volt DC output current||400 mA maximum|
|Relay rating||24VDC at 3 Amp|
|Wireless Range||1,500 Feet (1/2 Mile) Line of Sight|