The HUB-T Amseco Potter Hold Up Switch-Two Button provides two sets of momentary or latching DPDT contacts for actuating surveillance cameras or other security applications, in addition to the hold-up signal. The two sets of contacts may be used independently of each other, or they may be wired in series with a jumper wire for additional protection against false alarms. See illustration on page 2.
Install in accordance with UL 681. Devices should be installed so they cannot be observed by the public and so they can be operated inconspicuously. At least one shall be installed in each vault open during business hours. In banks they shall also be installed in offices commanding a view of the public space.
|What's in the box||(1) Amseco Potter Hold Up Switch-Two Button|
Write Your Own Review
|Dimensions||2 1/16"W x 3 7/16"L x 1 1/4"H
52.4 cm W x 87.3 cm L x 2.7 cm H
|Switch Rating||3 Amps at 28V DC/AC
.05 Amp at 125V DC Resistive
|Temperature Range||32°F to 140°F (85% maximum humidity)|
|Environmental Limitations||Not recommended for outdoor use or use in coolers or freezers|