Honeywell Vista 20P Starter Kit with Voice Dialer

See other Honeywell products

Be the first to review this product

The high capacity, feature-rich Vista 20 features up to 48 zones of protection, Internet uploading/downloading, graphic keypad support and dual partitions.
Brand: Honeywell
Part Number: V20P-KIT1

Availability: Out of stock




The high capacity, feature-rich Honeywell Vista 20 features up to 48 zones of protection.


  • IP alarm reporting and uploading/ downloading capability for Internet and Intranet use via iGSMV4G, 7845i-ENT, GSMV4G or GSMX4G
  • Supports four graphic touchscreen keypads
  • Wireless keys can be programmed without using zones
  • Eight on-board hardwired zones standard (15 when Zone Doubling feature is used)
    - 40 hardwire expansion zones
    - 40 wireless expansion zones
  • Two low current on-board trigger outputs
  • 100 Event Log viewable at system keypads with time/date stamp
  • 48 system user codes assignable to either partition
  • Expandable to 48 total zones when used with hardwired and/or wireless expansion modules
  • Two independent partitions plus a common partition
    - Global Arming from any system keypad
    - Go to function to view or operate one partition from the other
    - Separate partition account numbers
  • 16 output devices
    - Relays (Model 4204 Relay Modules, or 4229 Expansion Module)
  • Four installer-configurable zone types allows the installer to create custom zone types by assigning all zone attributes
  • Supports four-wire and up to 16 two-wire smokes
    - Works with Sentrol CleanMe(TM) maintenance signal
  • Multiple actions on output devices depending on system state
    - Turns lights off when system arms
    - Turns the same light on when system disarms
    - Flashes same lights when system is in alarm
  • Built-in phone line cut monitor with programmable delay and annunciation options
    - Display on system keypads
    - Trigger local sounders
    - Trigger system bell

Security Dealer Features

  • Automatic System Load Shed
    - During extended AC power fail, the system battery will be disconnected to prevent irreversible battery failure. Reduces service calls to replace batteries.
  • Dynamic Signaling
    - Reduces redundant reporting to the central station when multiple reporting methods are used; i.e. digital dialer and AlarmNet radio

Valuable End-User Features

  • Viewable on system keypads:
    - Exit countdown
    - Time and date display*
    - Event log*
  • Auto keypad backlighting on entry
  • Keyswitch arming
  • Programmable macro buttons and single-button arming
  • Supports a variety of wireless remote controls for single-button operation
  • User Scheduling
    - Latchkey reports to pagers
    - Auto arm/disarm
    - “User access” time windows
  • VIP Module allows system control from any touchtone phone
  • Chime by zone

*Requires custom alpha keypad

Additional Info

Additional Info

Part Number V20P-KIT1
What's in the box

(1) VISTA20P 48 Zone Control Panel
(1) 6162 Alpha Keypad
(1) AURORA PIR Motion Detector
(2) WAVE2 Ademco Two Tone Siren
(1) DL-125C 2 Channel Speech Voice Dialer
(1) ELK-912 - Relay Module SPDT 12 VDC
(1) BD412 12 Volt 4AH Alarm Battery
(1) RJ31X Jack and Cord
(1) 16.5 Volt Transformer
(1) Cam Lock


Write Your Own Review

You're reviewing: Honeywell Vista 20P Starter Kit with Voice Dialer


Total Connect




sale $101.50