The ISC-PDL1-W18 Professional Series TriTech Detectors are exceptionally suited for commercial indoor applications. Sensor data fusion technology ensures that the detectors send alarm conditions based on precise information. Tri-focus optics eliminate coverage gaps and respond efficiently to intruders. The powerful combination of unique features in the Professional Series delivers superior catch performance and virtually eliminates false alarms.
The self-locking two-piece enclosure, built-in bubble level, flexible mounting height, and three optional mounting brackets simplify installation and reduce service time.
- 18-m x 25-m (60-ft x 80-ft) coverage, field selectable to 8-m x 10-m (25-ft x 33-ft)
- EN50131-2-4 Grade 2 compliant
- Sensor data fusion technology
- Tri-focus optics technology
- Range adaptive radar
Sensor Data Fusion Technology
Sensor data fusion technology is a unique feature that uses a sophisticated software algorithm to gather signals from five sensors: two pyroelectric sensors, range adaptive radar, a room temperature sensor, and a white light level sensor. The microcontroller analyzes and compares the sensor data to make the most intelligent alarm decisions in the security industry.
Tri-focus Optics Technology
Tri-focus optics technology uses optics with three specific focal lengths: long-range coverage, middle-range coverage, and short-range coverage. The detector applies the three focal lengths to 86 detection zones, which combine to make 11 solid curtains of detection. Tri-focus optics technology also includes two pyroelectric sensors, which deliver twice the standard optical gain. The sensors process multiple signals to deliver precise performance virtually free of false alarms.
Range Adaptive Radar
The microwave transceiver automatically adjusts its detection thresholds based on input from the PIR sensors. Integrating the target audience distance information from the PIR significantly reduces false alarms from the microwave Doppler radar
The detector sends a supervision-trouble signal if microwave reflective material is placed within 30.5 cm (1 ft) of the detector.
Supervised Microwave and PIR
The detector provides single technology coverage if the microwave subsystem fails.
Active White Light Suppression
An internal light sensor measures the level of light intensity directed at the face of the detector. Sensor data fusion technology uses this information to eliminate false alarms from bright light sources.
Field Selectable Coverage (18 m x 25 m or 8 m x 10 m)
Installers can use a DIP switch to select 18 m x 25 m or 8 m x 10 m (60 ft x 80 ft or 25 ft x 33 ft) coverage.
Dynamic Temperature Compensation
The detector automatically adjusts PIR sensitivity to identify human intruders at critical temperatures. Dynamic temperature compensation detects human body heat accurately, avoids false alarms, and delivers consistent catch performance at all operating temperatures.
Cover and Wall Tamper Switch
When an intruder removes the cover or attempts to separate the detector from the wall, a normally-closed contact opens to alert the control panel.
The LED brightness adjusts automatically to the surrounding light level. A blue light-emitting diode (LED) indicates dual alarms and activates during a walk test. A yellow LED indicates microwave alarms, and a red LED indicates PIR alarms.
Remote Walk Test LED
Users can type a command through a keypad, a control center, or programming software to remotely enable or disable the walk test LED. Users can locally enable or disable the walk test LED through the DIP switch.
Alarm memory flashes the alarm LED to indicate stored alarms for use in multiple unit applications. A switched voltage from the control panel controls the alarm memory.
Solid State Relays
Solid state relays send silent alarm output signals to provide a higher level of security and reliability. An external magnet does not activate the relay. The solid state relay uses less current than a mechanical relay, providing longer standby capacity during a power loss.
Draft, Insect, and Small Animal Immunity
The sealed optic chamber provides immunity to drafts and insects, reducing false alarms. Small animal immunity reduces false alarms caused by animals less than 4.5 kg (10 lb), such as rodents.
Remote Self Test
A remote self test initiates when the walk test input switches to its true state. The alarm relay and alarm LED activate for four seconds following a successful test. The trouble relay activates, and the alarm LED flashes following a failed test.
Input Power Supervision
When the power is lower than 8 V, a low input power trouble condition activates the trouble relay and causes the LED to flash. The trouble condition clears automatically when power reaches or exceeds 8 V.
When the walk test input switches to its true state for less than two seconds, LED flashes to indicate the most recent trouble condition. If there is no trouble in memory, the LED does not flash. After twelve hours, or after the detector receives a second walk test pulse for two seconds or less, the LED stops flashing and the trouble memory clears.
|What's in the box||(1) Bosch ISN Series Tri-Tech Pet Immune Motion Detector w/ Anti Mask|
Write Your Own Review
|Voltage (Operating)||9 VDC to 15 VDC|
|Current (Maximum)||< 25 mA|
|Current (Standby)||13 mA|
|Relay||Solid state relay, normally-closed (NC) contacts power supervised.
3 W, 125 mA, 25 VDC, resistance < 10 Ω.
|Tamper||Normally-closed (NC) contacts (with cover on) rated at 25 VDC, 125 mA maximum.
Connect tamper circuit to 24-hour protection circuit.
|Trouble||Solid state relay normally-closed (NC) contacts.|
|Dimensions||136 mm x 69 mm x 58 mm
(5.25 in. x 2.75 in. x 2.25 in.)
|Material||High-impact ABS plastic|
|Alarm Indicator:||Blue LED for TriTech alarms
Yellow LED for microwave alarms
Red LED for PIR alarms
|Radio Frequency Interference
|No alarm or setup on critical frequencies in the range from 26 MHz to 1 GHz at 50 V/m.|
|Relative Humidity||0 to 95%, non-condensing|
(Operating and Storage)
|-29°C to +55°C (-20°F to +130°F)
For UL Certificated installations, 0°C to +49°C (+32°F to +120°F)
|Environmental Class II||EN 50130-5|
|Protection Rating:||IP41, IK04 (EN 60529, EN 50102)|