Honeywell Indoor WiFi Camera

Be the first to review this product

Honeywell's iPCAM-WIC1 Camera is ideal for monitoring your home, business or public facilities.
Color video can be monitored through your Mobile App and Total Connect remote services account.

Brand: Honeywell Intrusion
Part Number: IPCAM-WIC1

Availability: In stock




    Honeywell's iPCAM-WIC1 Camera is ideal for monitoring your home, business or public facilities.
Some major features of this camera are:
    Wireless communications to a router or access point. Wireless communications utilizes the 802.11b/g.
    Qr code is used for easy setup to the wireless network, a Bluetooth capable device will be required for setup.
    Color video can be monitored through your Mobile App and Total Connect remote services account.
    Up to 8 cameras can be used per location.
 IMPORTANT: This camera is for indoor use only. To utilize this camera, you must have:
    An AlarmNet account for a GSM or Internet communicator, or a “Video Services Only” account, ensuring video services have been enabled for 7 or 30 day storage.
    Total Connect account.

Additional Info

Additional Info

Part Number IPCAM-WIC1
What's in the box

(1) IPCAM-WIC1- Honeywell Indoor WiFi Camera for Total Connect - White


Write Your Own Review

You're reviewing: Honeywell Indoor WiFi Camera




Internal antenna only

FCC/IC RoHS The camera has been tested and found to comply with the limits for a Class B computing device in accordance with the specifications in Part 15 of FCC rules. This Class B digital apparatus complies with Canadian ICES-003.

Supports audio signals from a microphone on the device or an add-on microphone

The bandwidth needed for streaming video varies with the video quality that is set for the camera(s), how much activity the camera(s) see, conditions on the network and other factors. For most users streaming 720p video, about 2Mbps of your internet connection's bandwidth is required. Minimum- 1.024 Mbps Average(Normal Visual Activity)- 1.333 Mbps Maximum(High visual Activity) - 2.9 Mbps to 3 Mbps

With stand: 2.5"wide X 4.4"tall X 1.8"deep

Flash upgradeable Firmware allows firmware updates over the internet. This is automatically done by the server.

135 degree wide angel view. digital zoom 2-5x. Pinch to zoom is available during live streaming and when reviewing a captured image.
F 2.0; DFOV 135 deg. HFOV: 108 deg

256 bit AES

0.5 Lux minimum

1280 X 720; H.264@30fps; MJPEG@30fs

OV9732, 1/4" 1MP CMOS Sensor

Multi-area motion detection with different level of sensitivity.

During installation: Blue, blinking (Power on, Ready to start setup) Blue, steady (Connected to the app. Ready to complete setup) Purple, steady (QR code scan is complete. Restart the WI-FI connection process. Green, Blinking (Connecting to WI-FI network) During Operation: Green, blinking (Connected to WI-FI network) Green, steady (Connected to WI-FI and operating. Red, blinking (Not connected to WI-FI) Low-light operation is indicated by two small LEDs above the main LED.

Live streaming video from this camera is accomplished by using the TC2 smart phone mobile app. Live streaming is available in 90 second intervals. Pinch to zoom is also offered when streaming live video. TotalConnect2.0-HTML5 will allow viewing of a thumbnail, recording a 30second clip that will be stored in the sites “Event” section.

Via the TC 2 smartphone mobile app and TC2-HTML5 website, the camera can be set to record a 30 second clip upon detecting motion. Triggered events by motion or sound if enabled will be captured continuously. Up to 2 separate detection areas (and sensitivity for each, low , medium & high) can be set up in the video configuration of the mobile app. The camera will record a 30 second video clip with no gap between clip recordings when detection occurs in the established areas, as long as the "Privacy mode" is not enabled. The detection area size can be made large or small. NOTE: This camera does not have a PIR sensor. Motion is detected by “looking” for changes in an image within the detection zone.

Camera is for indoor use only!! DO NOT mount this camera within one [1] foot of any other wireless device. The unit provide flexible mounting options with the mounting hole on the back of the camera or with a magnetic base for desktop mounting.

5VDC/2A Plug in transformer. Note: Transformer Cable can be extended using the 9'ft power extension cable. This is not included with the camera.

2.4 GHz

32F to 104F (0C to 40C)

Currently there is no live viewing of cameras through the website. Mobile apps only.
Legacy Cameras - You can add up to 6 AlarmNet IP legacy cameras per TC2 Location. These will always follow on a 7 day video storage plan. New Generation Cameras - You can add up to 8 next generation cameras per TC2 Location. These can be on a 7 or 30 day video storage plan. 7 days or 350 clips rolling video event storage/camera, support 8 cameras/Location First in First Out 30 days or 1500 clips rolling video event storage/Camera, support up to 8 cameras/location First in First Out *** If 30 day video storage plan is selected, you will be billed for 30 day plan regardless of what type of cameras exist on the account.

It is recommended that AlarmNet IP cameras maintain a high signal level. Minimal signal level is 30, maximum is around 75 but may be higher depending on the environment. This can be viewed in the TC2 smart phone app, in the settings, Camera information. Being at the minimal or lower can result in loss of network connection. A Wifi signal meter is available in the TC2 smartphone mobile app in the preview window of the camera.

Operating range is up to 300' with no barriers in the line of sight.. Actual range may be longer or shorter dependent upon environmental factors at the installation site.