Expert Advice You Can Trust!

888-501-7870

Holdup & Panic

5 Item(s)

Set Descending Direction
per page

Grid  List 

  • Amseco Key Resettable Hold-Up Switch

    The HUSK-20 is a mechanical hold-up switch designed for silent operation. It is activated by using one finger to press down on the switch. When activated, the switch mechanism locks, insuring an immediate alarm signal. A status window designed on top of the hold-up switch indicates its condition: RED (alarmed) and BLUE (armed). To reset the HUSK-20, use the key provided. The housing is made of metal and is painted gray. Learn More
    $15.95

  • Amseco Potter Hold Up Switch-Two Button

    The HUB-T Amseco Potter Hold Up Switch-Two Button provides two sets of momentary or latching DPDT contacts for actuating surveillance cameras or other security applications, in addition to the hold-up signal. The two sets of contacts may be used independently of each other, or they may be wired in series with a jumper wire for additional protection against false alarms. See illustration on page 2. Learn More
    $17.95

  • Hardwired Holdup switch with Stainless Steel Cover

    The 269R Holdup Switch is a finger-operated switch for activating the holdup signal at the control and any other security application. They are ideally suited for use in locations such as banks, jewelry stores, retail establishments or any situation that requires hold-up notification. Learn More
    $19.12

  • N/O OR N/C Panic Switch

    1 Review(s)
    United Security HUB2SA Momentary Non Latching Panic Switch. Manufactured with gold, silver and copper for maximum conductivity and corrosion resistance Current rating of 10 am Learn More
    $16.25

  • USP Holdup Button - Latching

    1 Review(s)
    The HUB2 - USP Holdup Button-Latching can be used to trigger a variety of security equipment, including silent alarms, surveillance cameras, alarm systems, recorders, and even Hold Up Notifications. You won't have to worry about your equipment being accidentally triggered, as false activation is completely prevented by the HUB2's recessed button. Additionally, since this HUB2 is a latching switch, it includes a reset tool. Learn More
    $16.25

5 Item(s)

Set Descending Direction
per page

Grid  List 

Holdup & Panic Buttons

Holdup and panic buttons make up an important piece of the home security puzzle. They enable you to remotely send emergency signals to an alarm system, even if you can’t physically access the control panel. Most panic buttons consist of a single button designed to remotely trigger an alarm, and most holdup buttons can be programmed to send silent triggers to contact the authorities – as is commonly seen in shops, banks and other commercial environments.

Superior Business Security

Holdup buttons are most commonly used in business environments, but they have residential applications as well. When used for businesses, holdup buttons are typically mounted beneath the counter or money drawer. When the transmitter is activated on a holdup button, it sends an RF signal to a corresponding receiver. When the control panel then sends a burglary alarm to the authorities or monitoring station, burglars are unaware that the police are on the way.

And For the Home

Panic buttons are more commonly used in homes, and you have a tremendous amount of freedom when it comes to panic button installation. These devices can be built into the wall to be hidden or to be seen in plain sight, and you can even use portable buttons that look like feyfobs. A portable panic button can be worn around the neck, worn around the wrist, or attached to a key ring. It’s also a good idea to keep a portable panic button at your bedside while you sleep.

A Variety of Panic Buttons to Choose From

The majority of panic button devices consist of a single button, but you’ll also find dual-button options which require the activation of both buttons simultaneously. This configuration makes it more difficult for someone to accidentally trigger a false alarm, and many people find them favorable to the simpler single-button devices. At Home Security Store, we offer dual-button and even triple-button options.

Order Yours

You have a lot of variables to consider. When you make your holdup or panic button selection, you should look for fast and easy enrollment features, as well as water-resistant parts. You’ll also want to consider the mounting equipment, and review the detailed breakdown of all included features. At Home Security Store, we only carry top-quality holdup and panic buttons, made by top manufacturers like Honeywell, Visonic and GE Interlogix. Order yours today, and provide yourself with an invaluable added level of safety.

Holdup & Panic

Minimal Price: $4.95