Holdup & Panic

Items 1 to 10 of 22 total

per page
  1. 1
  2. 2
  3. 3

Grid  List 

Set Descending Direction
  • 2 Button 1 Channel Handheld Transmitter

    The Model DXT-21 2-Button, 1-Channel Handheld Transmitter is a battery powered portable transmitter designed for use with Linear's DX Format receivers. Each transmitter can be Learn More

  • 3 Button 4 Channel Handhald Transmitter

    The Model DXS-23 Supervised 3-Button, 4-Channel Handheld Transmitter is a supervised, digitally coded radio transmitter designed for use with Linear's DX and DXS Format rec Learn More

  • 3040-W Sentrol Panic Switch

    The 3040-W can be mounted out of sight but within easy reach for manual activation, such as under desks or counters in banks, jewelry stores and other facilities where people or property are at risk.

    Learn More

  • Amseco Hold-Up Switch - Momentary

    The Model HUB-M provides momentary or latching DPDT contacts for actuating surveillance cameras or other security applications. Learn More

  • Amseco Key Resettable Hold-Up Switch

    The Amseco HUSK-20 is a mechanical hold-up switch designed for silent operation. It is activated by using one finger to press down on the security panic switch. When activated, the security panic switch mechanism locks, insuring an immediate alarm signal. A status window designed on top of the hold-up switch indicates its condition: RED (alarmed) and BLUE (armed). To reset the Amseco HUSK-20, use the key provided.The housing is made of metal and is painted gray. Learn More

  • Amseco Potter Hold Up Switch-Two Button

    The HUB-T Amseco Potter Hold Up Switch-Two Button provides two sets of momentary or latching DPDT contacts for actuating surveillance cameras or other security applications, in addition to the hold-up signal. The two sets of contacts may be used independently of each other, or they may be wired in series with a jumper wire for additional protection against false alarms. See illustration on page 2. Learn More

  • Amseco Tool Resettable Hold-Up Switch- HUS-7A

    The HUS-7A is a single button, latching hold-up switch designed to provide a rapid signal to alarm systems. It is activated by pressing down the single button switch. Learn More

  • DXS-LRC - Linear Wrist-Pendant Long Range Emergency Transmitter

    The Linear DXS-LRC is a battery powered, miniature water-resistant, supervised transmitter designed for use in emergency applications with Linear's DX and DXS Format receivers. Learn More

  • Hardwired Holdup switch with Stainless Steel Cover-269R

    The 269R Holdup Switch is a finger-operated switch for activating the holdup signal at the control and any other security application. They are ideally suited for use in locations such as banks, jewelry stores, retail establishments or any situation that requires hold-up notification. Learn More

  • Honeywell Commercial Wireless Hold-Up Switch w/ Transmitter

    The Honeywell 5869 Holdup Switch/Transmitter is a finger-operated RF transmitting device. It is typically mounted under a counter or money draw for inconspicuous operation. When the Learn More

Items 1 to 10 of 22 total

per page
  1. 1
  2. 2
  3. 3

Grid  List 

Set Descending Direction

Holdup & Panic Buttons

Hold up and panic alarm buttons make up an important piece of the home security puzzle. Hold up buttons enable you to remotely send emergency signals to an alarm system, even if you can’t physically access the control panel. Most panic buttons consist of a single button designed to remotely trigger an alarm, and most holdup buttons can be programmed to send silent triggers to contact the authorities – as is commonly seen in shops, banks and other commercial environments.

Superior Business Security

Hold up buttons are most commonly used in business environments, but they have residential applications as well. When used for businesses, holdup buttons are typically mounted beneath the counter or money drawer. When the transmitter is activated on a holdup button, it sends an RF signal to a corresponding receiver. When the control panel then sends a burglary alarm to the authorities or monitoring station, burglars are unaware that the police are on the way.

And For the Home

Security panic buttons are more commonly used in homes, and you have a tremendous amount of freedom when it comes to panic button installation. These devices can be built into the wall to be hidden or to be seen in plain sight, and you can even use portable buttons that look like feyfobs. Portable security panic buttons can be worn around the neck, worn around the wrist, or attached to a key ring. It’s also a good idea to keep a portable panic button at your bedside while you sleep.

A Variety of Security Panic Buttons to Choose From

The majority of panic button devices consist of a single button, but you’ll also find dual-button options which require the activation of both buttons simultaneously. This configuration makes it more difficult for someone to accidentally trigger a false alarm, and many people find them favorable to the simpler single-button devices. At HomeSecurityStore.com, we offer dual-button and even triple-button options.

Order Yours

You have a lot of variables to consider. When you make your holdup or panic button selection, you should look for fast and easy enrollment features, as well as water-resistant parts. You’ll also want to consider the mounting equipment, and review the detailed breakdown of all features included with your panic button alarm. At HomeSecurityStore.com, we only carry top-quality holdup and security panic buttons, made by top manufacturers like Honeywell, Visonic and GE Interlogix. Provide yourself with an invaluable added level of safety and order your security panic buttons and alarm systems today.

Holdup & Panic

Minimal Price: $4.64