PG9916 Wireless PowerG Smoke & Heat Detector
The PG9916 is a fully supervised Wireless PowerG photoelectric smoke and heat detector. The PG9916 reliably provides early warning of fire by sounding an alarm when smoke is detected and by transmitting a coded alarm signal to the alarm system. In addition, the PG9916 monitors for a high temperature heat condition and provides an alert upon exceeding the fixed temperature of 60°C (140 °F).
With minimal installation time required and few holes to drill, the PG9916 Wireless Smoke and Heat Detector reduces on-site time and increases productivity and revenue. Being wireless, these detectors offer home or business owners more choice in where they may be installed, to include locations in which wiring is difficult or impossible. Maintenance is also made easy, with audio and visual sensitivity degradation indicators notifying when detector cleaning/ replacement is required.
- Photoelectric smoke detector with built-in heat sensor
- Provides alerts for smoke, tamper and device low battery
- Visible link quality indication shown on the device
- Fully supervised
- Maintenance and battery condition indication
- Built in 85db Alarm Buzzer
|What's in the box||(1) DSC Wireless PowerG Smoke & Heat Detector|
Write Your Own Review
|Dimensions||120mm x 63mm (4.7in x 2.5in)|
|Battery Life||5 years (typical use)|
|Battery Type||3V, CR2032 Lithium battery|
|Operating Temperature||-10°C to 55°C (14°F to 131°F)|