The 5877GDPK includes the 5877 Relay Receiver and a 5800SSA-1 Z-Wave Wireless Siren & Strobe Alarm. It provides an audible and visible warning that the garage door opener is being remotely activated via the Lynx Touch Control Panel.
If the Lynx Touch system has been equipped for garage door control, installation of both the 5877 and 5800SSA-1 is required for remote unattended garage door control. The installation of a 5822T Tilt Sensor or Door/Window Transmitter (i.e.; 5816), allows the Lynx Touch to provide the status of up to four Garage Doors (one transmitter per door). The Lynx Touch can be armed when the garage door is open, and once the garage door has been closed, the zone will be monitored as part of the security system. It can also be programmed for monitoring only without providing burglary protection. The panel also features the option to automatically close the Garage Door(s) if it has been left open for more than a specified (programmable) period time or at a specified time.
1. The system must be equipped with the L5100-ZWave Home Automation module.
2. The 5877GDPK is not compatible with: - Chamberlin/Lift Master MyQ technology (Including but not limited to; Models 8550, 8360 and 8500). - One piece or swinging garage doors.
3. Garage door control must have working entrapment protection (automatic reversing mechanisms and electronic photo eye sensors that detect obstructions).
4. Both the 5877 Relay Receiver and the 5800SSA-1 Siren Strobe must be installed.
|What's in the box||(1) Honeywell Garage Door Control Kit w/ Relay Receiver & Z-Wave Wireless Siren/Strobe|