2GIG Super Switch Wireless Takeover Module

See other 2GIG Technologies products

The 2GIG-TAKE-345 Super Switch is 2GIG's wireless takeover module. This unit was designed to convert 8 hardwired zones into either wireless zones, make installation simply, and work with existing 12-volt control panels. The module is to be mounted next to the existing control box where the hardwires zones are connected. All of the zones on the Super Switch act as supervised wireless zones.
Brand: 2GIG Technologies
Part Number: 2GIG-TAKE

Availability: More than 5 in stock

Ships tomorrow if ordered within
18 hrs and 51 mins!

$51.50
2GIG Technologies

Same Day Shipping on orders
placed before 2 pm PST

Highest Quality Products
Guaranteed

30 Day Money Back Guarantee

Description

Details

The 2GIG-TAKE-345 Super Switch is 2GIG's wireless takeover module. This unit was designed to convert 8 hardwired zones into either wireless zones, make installation simply, and work with existing 12-volt control panels. The module is to be mounted next to the existing control box where the hardwires zones are connected. All of the zones on the Super Switch act as supervised wireless zones.

Features:

  • Converts hardwire zones to wireless frequency
  • Converts 8 zones per module (additional modules may be added)
  • Integrates with 12-Volt panels
  • Easily connects to existing control panel's battery
  • Provides power backup through existing hardwire panel

Additional Info

Additional Info

Part Number 2GIG-TAKE
What's in the box (1) 2GIG Super Switch Wireless Takeover Module

Reviews

good way to saveReview by Williamsplex
Rating
Like many, I had an aging Ademco system. The brains/keypads were trash, but the basic magnetic wired contacts and sensors were all fine. No need to fix what isn't broken.

This made switching over to 2GIG much faster. Knocked out a dozen contact points and 5 zones by simply bridging with this. NOTE: You have to spend a little time reading instructions and mapping. Label your wires. Check the schematic. Test. Took me about 45 minutes to insert the right wires and program. (Posted on 11/6/14)

Write Your Own Review

You're reviewing: 2GIG Super Switch Wireless Takeover Module

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Rating

Specifications

Wireless Signal Range 350 ft, open air
Code Outputs For each of the 8 serialized zones: Fault; Restore; Tamper; Low Battery
Transmitter Frequency 345,000 MHz
Transmitter Frequency Tolerance +/- 15 kHz
Modulation Type Amplitude Shift Keying--On/Off Keying (ASK OOK)
Unique ID Codes Over 1 million different code combinations
Supervisory Interval 70 minutes
Peak Field Strength Typical 50,000 uVm at 3m
Dimensions 3.54 xx 2.56 x 1.13 inches
Weight 2.85 oz.
Housing Material ABS Plastic
Color White
Operating Temperature 32° to 120° F
Relative Humidity 5-95% Non-Condensing
Operating Voltage 9-16 volts DC, 50mA
Regulatory Listing ETL, FCC Party 15, Industry Canada
Included Accessories Mounting plate, two (2) Phillip's head screws, two (2) plastic drywall anchors